It is a simple modification. I cut some footprint tieouts off a used up REI tent foorprint I had. They have the small grommet rings for smaller poles. I stitched up the nylon ribbing to complete the loop and then looped them through the center tieouts of my OMW. I then purchased a replacement pole set from Bass Pro (ultralight aluminum poles) for about 20 dollars. They come with everything you need already put togehter. I reduced the pole sets down to three sections which is about 54 inches keeping the shock cord inside. I then place these in the small holes in the tie-outs above the OMW and it opens it up nicely. I will try and put a picture set up so you can see. It took about 30 minutes to do everything. The poles store nicely in my pack.
Hope this helps.