Originally Posted by Roadrunnr72
Looks good, but in your write up you have a few places that had me a little confused until I looked at the pic closer. You put a piece of PVC in the eye bolt, then pressed a NUT, not a bolt into it. And again where you put the 3/8" NUTS (not bolts) and washers inside the pipe leg and floating on the bolt to keep it from crushing the leg.....RR
Hey, good catch, I was so excited to have it working that I was just slinging words out.. It's all together in my mind, it's the transfer of info that is the hardest part... I'll fix it thanks.