Triangle version 2.0
I hope the pics come through...im using an app from my phone.
So here is version 2.0. I went back to 7/64 Amsteel.
So I have a woopie hook spliced in on the head end (my first splice)...and secured the splice with 10 lb braided dyneema fishing line. Before I had the cord attached directly to the hammock but it was a pain in the but if i ever wanted to disconnect it for whatever reason.
Then I run it up to a camp nano biner which is attached to half inch webbing via a marlin spike hitch
The webbing is wrapped around the tree front to back to avoid putting a bite into the strap. So there are two half inch straps bearing the load on the back of the tree.
The reason I am using the biner is because it is nice and smooth. I have found that Friction from hardware at the tree straps is bad for this type of suspension.
then it goes to a biner on the other tree...and then back down to the foot end of the hammock.
At this point I use two dutchware titanium biners in a garda hitch...and it works very very well.
Thats it...I hope the pictures got through.