So here's the issue:
You can see the really tiny stitches starting on the green fabric I scavenged from some JCP puffers
2015-03-29 17.50.03.jpg
As I'm sewing along it mostly behaves until this interface of the two fabrics. The royal blue is 1.0 NylonD. You can see huge loose stitch that skips from the green like an inch into the blue side. (the bottom row on the blue side is me trying to adjust thread tensions to fix it with no success)
2015-03-29 17.50.20.jpg
Then it just has random stitch lengths after that.
2015-03-29 17.43.29.jpg
I've only done a few sewing projects in the past, so I really have no experience when things start to go wrong like this.
Thanks for any advice you guys can give!
Bookmarks