Another DIY hammock raffle giving back contest...X2

[Comet_Seeker]

Being that this would be my first large DIY project, and fairly new to sewing, I wanted to make sure I had a good idea of what was needed. So here is my best guess on materials (I tried to overestimate for newbie error factor). I want to make an 11' DL hammock with grey Argon 1.6 inside and Purple PolyD 1/4 outer. That way I can also reverse them depending on my mood. I would like to do the Dutch Buckle Suspension Kit. I also want to attempt the Fronkey style bugnet. Hopefully, if all goes well, I will have a matching stuff sack from the excess (again if all goes well)

Hammock
4 yards of Deep Purple PolyD 1.4
4 yards Charcoal Grey Argon 1.6
Argon 1.6 Gray 701 Gutterman Thread

Suspension
20 feet of Kevlar webbing
20 feet of silver amsteel
20 feet black amsteel
2 Dutch clips
2 Dutch Buckles
Pair of Double Hammock Hooks

Bug net
8 yards of Nano no see um
4 mini cord locks
20 feet of 3/32 shock cord.

Accessories
splicing needles
10 inch loop turner
25' orange dynaglide

[daverr]

Thanks again, Dutch. I'm looking to do a double layer Poly D Hammock with a fronkey bugnet.

9Yds black polyd 1.2
Gutterman black thread
Gutterman yellow thread (for the tree straps)
10 Yds noseeum mesh
Rigdeline biner
25 Feet 7/64th in Amsteel in black (ridgeline and continuous loops)
2 sewn-in Dutch clips for the straps
25 feet kevlar webbing.
2 TI cinch buckles
12 feet of 1/8 shock chord
4 cord locks

[Koolranch]

Thanks for another contest! I would like to make a single layer hammock with top cover and integrated bug net.

4 yards of Argon 67 Charcoal Grey
4 yards of NylonD 1.6 Burnt Orange
2 Titanium Ridgeline Biners
25 feet of Shock Cord
2 - Hookworms
25' orange dynaglide
1 spool of 7568 thread
Kevlar® Tree Huggers (pair) 7’
Titanium Ultralight Ascent Stakes 2ea

25 feet of 1/8 yellow Amsteel
2 yards of Nano NoSeeUm bug netting
Titanium Dutch Clips (Pair)

[grannypat]

Thanks! This is always fun. I'm sticking pretty much with my list from the first drawing, but changing the material. I have hammocks made from argon and polyD, so I'm going with NylonD 1.0 in grey.

I’d like to make an 11 foot hammock with knotty mods, a ridgeline organizer and a modified Fronkey-type black no-see-um bug net. Here is my supply list:

4 yards of NylonD 1.0 in Charcol Grey/Grey 701
1 spool of Gutterman thread in Black
15 feet of 1.75mm Zing It (yellow) for ridgeline, prussic knots for organizer and stuff sack
5 mini cord locks (2 for knotty mods and 2 for bug net and 1 for stuff sack)
8 feet (?) of shock cord to fit mini cord locks (5 yards for bug net, 3 (?) for knotty mods)
8 yards no see um fabric (scraps will be used to make organizer)
12 feet of black premium webbing for tree straps
18 feet of silver 7/64 amsteel for head end whoopies (15’) and continuous loop (3’)
18 feet of black 7/64 amsteel for foot end whoopies and continuous loop
6 feet of blue 7/64 amsteel with which to learn how to splice
2 whoopie hooks
1 splicing needles
1 10” loop turner
2 .5” stainless steel S-biners for organizer

BTW, I'm NEVER mean. Sweet old granny person.

[fastfoxengineering]

I need an UL hammock for a thru-hike!

9 footer x 58" wide in 1.0 nylond

4 Yards NylonD 1.0 in Charcoal Grey
1 Spool Gutterman Thread Black
25 ft grey lash it for fixed structural ridge line and stuff sack draw string
1 titanium ridge line biner for removable ridge line
4 mini cord locks for doubled sided stuff sack and bug net
enough .51oz cuben and tape to make a double sided stuff sack
8 yards no see um for fronkey style bug net
20 feet 3/32 shock cord for bug net
50 feet 7/64 Amsteel Silver for 2x whoopieslings and 2x continuous loops
2x whoopie hooks
20 feet kevlar strap for tree huggers
2x sewn in dutch clips

i hope i'm on point with the materials. I just want to build a simple ultralight hammock for my thru-hike. Simple gathered end with a bugnet, ridgeline, organizer, and ultralight suspension.

Thanks for the opportunity Dutch!

[gobiidae]

This is SO fun to think about. I am still relatively new to DIY, have sewn a TQ, camp pillows, and stuff sacks. Getting ready to start on two UQs. I also just placed a (for me) big order with you to upgrade the suspension systems on my two HHs. This hammock design would be for my 11 year old daughter to get her hanging with Dad and I (her and younger sister are still on ground in a two-man tent).

Overall, I'm thinking a double-layer 10ft gathered end hammock with fronkey style bug net, ridge line, continuous loop suspension with cinch bugs.

Materials:
Cinch bugs with 15ft webbing and sewn on Dutch clips
25 ft black 7/64th Amsteel
8 yds - PolyD 1.2-Brick Red
4 yds - Nano No-See-Um Bug Netting
1 - 10" loop turner
1 set - splicing needles
25 ft Zing it (yellow)
1 - roll Gutterman thread (red)

Thanks to you and your daughter~!

[dtp2c111]

Another chance at an awesome raffle. Just got an order from you in the mail yesterday. always great products!!

I'd like to make a simple brown hammock with some bling and a knotty mod and a fronkey net (or I may get zippers and make an integrated net!)


4 yards of Saddle Brown Argon 1.6
Gutterman Saddle Brown 767 thread

25' 3/32" shock cord (Knotty Mod & netting)
2 Mini Cord Locks (Knotty Mod)

50' foot of black 7/64th Amsteel
splicing needle (larger one as I just bought smaller one from you)

4 yards nano NoSeeUm Bug Netting

1 pair Titanium Dutch clips
1 pair 10' Tree Straps

1 pair Titanium Cinch Buckles
1 pair of whoopie hooks!!

25 feet of Lash it (ridgeline)
1 titanium ridgeline biner or one dutch wasp

1 loop turner

[RedStix]

Thanks for another opportunity, Dutch and Alana. The hammock I would build would be very much like grannypat's.

SL 11' NylonD and stuff sack in Deep Purple. Fronkey style bug net. Kevlar straps with with whoopie slings and whoopie hooks.

5 yards of NylonD 1.6 in Deep Purple 3529

1 spool of Gutterman thread in Deep Purple 3529

1 spool of Gutterman thread in Black

25 feet of 1.75mm Zing It (yellow) for ridgeline, prussic knots for organizer and stuff sack

7 mini cord locks (2 for knotty mods and 3 for bug net and 2 for stuff sack)

25 feet of shock cord bug net and knotty mods

8 yards no see um fabric (scraps will be used to make organizer)

1 Titanium Ridgeline Biner

5' Kevlar Tree Huggers(pair)

Titanium Dutch Clips (pair)

25 feet of Yellow 7/64 amsteel for head end whoopies and continuous loop (3’)

2 whoopie hooks

1 splicing needles

1 10” loop turner Good luck to all ! RedStix

[CountryRoads]

Alright, I'm gonna throw my name in the hat this time. I know it's accepted by most that you can't sleep two people in a gathered end, but I've done it (never for an entire night but for a decent amount of time), enough to convince me that it is actually doable and can be comfortable enough. I want to make a wider 11 foot gathered end; add about a foot to each side so the hammock would be about 7' x 11'. I would do it by using a flat felled seam to attach a strip of fabric to each side of the hammock. My thinking is even if those seams let loose, which I wouldn't expect them to do, the center would still hold us long enough to bail out safely. I have abused my argon 1.6 and I'd trust it to hold a good 400 lbs. Though, I'm also not one to be overly concerned about my hammock dropping me...been there, done that plenty of times.

List:
4 yards black Argon 1.6
4 yards grey Argon 1.6
I have everything else I would need to complete the setup.
Thanks Dutch!

[Countrybois]

I'm in!

11' poly d "grey goose" double layer

4 yds - 1.4 gray poly d
4 yds- titanium argon 90
Gray gutter man thread
5 feet - gray amsteel 7/64
2 - titanium cinch buckles
25' - orange dynaglide for ridgeline
30' - 1" Kevlar
2 -sew on Dutch clips
4 yards -no see um
8' -1/8" shock cord