Spray adhesive ??

[Slackdaddy]

I was making an UQ with Clima and ripstop.
I had to make relief cuts in the clima and then sew it to get my curve, then put it between 2 layers of nylon and pin it

I was thinking if there was some spray adhesive that I could use glue my dart cuts in the clima insulation, then "glue-tack" it to the nylon prior to sewing.

Any ideas or thoughts?

Thanks,
Slack

[pgibson]

Sounds like a lot of extra work.

If you have to hold everything together before sewing pins like you find in the sewing department work just fine to keep everything together in a single piece.

[Slackdaddy]

I have been pinning, but it's a PITA. Was thinking spray, slap, spray, slap. I'm looking to streamline the UQ making.
Now if I can find an easy way to sew the grosgrain on

Slack

[hk2001]

I have been pinning, but it's a PITA. Was thinking spray, slap, spray, slap. I'm looking to streamline the UQ making.
Now if I can find an easy way to sew the grosgrain on

Slack

That's easy.
http://www.ebay.com/itm/Sewing-Machi...-/400264286790

I picked one up in 1-1/2" back when I was making Hammock Chair underquilts. Turned the nightmare of adding the channels into a 30 second per side job. I never tried it on anything larger than 5.0 APEX, but I would assume it'd work just the same,