Thanks for putting this together build looks great. Did you get a final weight?
Thanks for putting this together build looks great. Did you get a final weight?
Is it possible to add another set of sliders to the coil? So, one set on each side of the hammock.
Last edited by ripstopbytheroll; 11-08-2015 at 17:28.
You already hinted at this, but do you think you need such a large triangle to use the 240" RSBTR zipper on an 11' hammock. If each side is 11' long you have a total circumference of 264" (11*2=22, 22*12=264). I imagine you would HAVE to use a triangle (unlike the XLC) to make up the extra 24", but you said you had 10" of overlap using the large triangle you used.
A large triangle like that wasn't required, but is a feature I put into all my hammocks. (It was actually harder to build this hammock accounting for that triangle) If I had gone all the way to the peak like the XLC I wouldn't have had a lot of overlap.
I prefer the large triangle simply because it makes it easier to manipulate the zipper over the RL of the hammock while laying in the hammock. I even do it on hammocks with non-removable nets like my recent HyperD Tie Dye Hammock I've built myself dozens of hammocks, and have the features I prefer pretty much narrowed down.
Thanks for the response. I've got the materials on the way from RSBTR to make one.
Throw me a PM if you have any questions, or need help with anything
Bookmarks