2QZQ Hammock Specialties
Specializing in:
Hennessy Hammock zipper modifications
Sewn on Tarp doors, Pole Pockets, and Grizz Beaks
Ridgeline and gear organizers, peak storage bags, UQ protectors, 2QZQ tree table!
2QZQ Hammock Specialties
Specializing in:
Hennessy Hammock zipper modifications
Sewn on Tarp doors, Pole Pockets, and Grizz Beaks
Ridgeline and gear organizers, peak storage bags, UQ protectors, 2QZQ tree table!
2QZQ Hammock Specialties
Specializing in:
Hennessy Hammock zipper modifications
Sewn on Tarp doors, Pole Pockets, and Grizz Beaks
Ridgeline and gear organizers, peak storage bags, UQ protectors, 2QZQ tree table!
I think I would vote for the full length with the slit sewed up. I love my ZQ mod, problem is I loaned my HH Exp to a fellow Corps of Insanity member and haven't gotten it back as of yet
I'm in for another mod. Let us know when you are ready for a pocket add.
I think the wider the better, 28-inches at least and full length. This would allow a thin ccf pad to fold up around the edge of the shoulders for most of us, cutting out some of the cold spots on the sides.
Rockdawg69
It's a long way to the top if you want to Rock and Roll ----- those hills!!!
Professional Prevaricator: Part-time dealer in Yarns, Tales, Half-Truths, & Outright Lies -1st half-hour session at no cost (Lawyers and Doctors excepted).
I have 2 Hennessys up there with you at the moment,,,, ummmm, how soon ya think, the pad sleeve will be in production,,, I would even volunteer one of them for a demo(possibly) demo....
Just to throw this in the mix... I don't have a dedicated position I sleep in when I use the HH Exped. I have removed the bugnet long ago and I can sleep head or foot on either end. I was playing around with using a piece of 1.1 DWR a few months ago for a double bottom in it. It was pretty easy, I just made another hammock and whiped it to the Hennessey, the pads slid in very easily and stayed put. However, I didn't actually make sewn pockets to put the extra wings in and I still needed my SPE to contain everything, so I abandoned the idea. But for people who use a wide enough pad it is very easy to do.
"I aim to misbehave." - Capt. Mal Reynolds
Mind of a Rat Youtube Channel
Is there a reason you couldn't overlap the exit with velcro just like the hammock opening is? It seems like you could just pull the two pieces of foam apart and slide right out. The other thing I thought about was "Tabs" that would come up inside of the regular opening but would have opposite Velcro so when you would get in and out just like you normally would?
Bookmarks