Hmmmm...a couple of CL's from Zing-it...

[jadekayak]

I haven't checked out the Japanese stove vids....but will. I've got three stoves...one I bought and the other two I made. My favorite of the three is the fancy feast wick stove. The simple coin can burner you made sounds interesting. How many oz. of fuel did you use for 55min?

I have no idea what an ounce of fuel looks like.
Can is about 1/6th height at 355ml std can so about 55ml.

By all accounts its a very long time but most have 16 .8mm or 1mm holes.
We have a very limited variety of Ali cans and bottles to choose from here. Red Bull small bottles and camping flasks.

I like the wider variety so you have a stable potstand built in.
The holes are on the outside and the neck is forcefit inside the base upside down.

My coin stove was posted on HF but a moderator moved it to an area that only "donating" members have access to.
Photo in the dark so you can see the flame jets.

[piknchikn]

Dog bones are awesome little life savers. I haven't needed one that long but find myself using one almost every trip.

[wa4chq]

Well, I'm still working on getting everything in place and tested. I'll be posting my idea with results soon.

Now, I could use a couple of short D-bones for strap extensions, tnx for another project!!

Zilla, the 104" d-bone was for my version of a SLS. I now own a 104" dog bone!
Piknchikn, they are easy to make and will be useful. In the past I just used two bowlines in the ends of short lengths of amsteel. Dogbones look better.

Dog bones are awesome little life savers. I haven't needed one that long but find myself using one almost every trip.

Sent from my XT1031 using Tapatalk

[wa4chq]

I have no idea what an ounce of fuel looks like.
Can is about 1/6th height at 355ml std can so about 55ml.

By all accounts its a very long time but most have 16 .8mm or 1mm holes.
We have a very limited variety of Ali cans and bottles to choose from here. Red Bull small bottles and camping flasks.

I like the wider variety so you have a stable potstand built in.
The holes are on the outside and the neck is forcefit inside the base upside down.

My coin stove was posted on HF but a moderator moved it to an area that only "donating" members have access to.
Photo in the dark so you can see the flame jets.

We seem to have a fair bit of alum. cans here...in Virginia they don't charge a deposit for them so the ditches in some areas sadly become a resting place for them. That's where I found the alum can for my fancy feast stove.

Sent from my XT1031 using Tapatalk