ENO on Vivere stand

[ka8yiu]

I have the Amazon-sold Vivere Double Hammock that I bought to use inside. ( https://www.amazon.com/Vivere-Double...+hammock+stand ) Now that I am in SW Florida, I want to use it on my lanai. Now, a cotton hammock left outdoors in the heat and humidity will probably mold and mildew. Therefore, I am thinking of getting an ENO Doublenest to keep outside on this stand.

So, the question is: Should I just attached the ends of the ENO to the hooks on this stand, thereby laying the material over the supports, or should I attach it to straps and lay the straps over the supports, which attach to the hooks? The supports span 9' 6".

Kevin
Stand.jpg

[Bubba]

I have that stand and I lay the continuous loops exiting the end channel over the supports so the hammock material is as close as possible without going over the supports. The material might be ok going over the supports but it's fine doing it the way I do. It does give a fair amount of sag since the uprights do flex inwards a little (I'm 275lbs) but my ENO is still comfortable in it.

[hammer0419]

Do not hang fromm hammock itself. install continuous loop at each end and hang from them.