Mt Washington 3 install

[curveball]

Anybody have any good video links for an install?

[HillbillyHanger]

The Jacks have a good video showing how to install a Nest underquilt on a Hennessy hammock. I would think the Mt. Washington 3 would be similar since they have the same type of suspensions. In the video, Jack describes some of the differences between installing on a Hennessy and other gathered end hammocks. You can find the link on their website or just search Youtube for JacksrBetter.

[curveball]

Thanks Hillbilly, that's what I needed

[Woolman]

Mount Washington 4 recorded a few weeks ago getting my winter gear ready.

https://www.youtube.com/watch?v=h8i5x9o_9iE&t=8s

[Shug]

Here is a video I did...installing a Hudson River in UQ mode. Same suspension as Mt Washington 3.
May give some insight.
Shug

[Vanhalo]

Here is a video I did...installing a Hudson River in UQ mode. Same suspension as Mt Washington 3.
May give some insight.
Shug

What is the difference between the Hudson River and the Mt Washington 3?

They spec out virtually the same and I am having a hard time seeing their individuality.

I think the Hudson River would be better option because its wider and longer by a wee bit.


Hudson River TQ/UQ

Regular Size

• Length: 78 inches (1.98 m)
• Width: 48 inches (1.22 m)
• Loft: 2.5 Inches (6.4 cm)
• Material: 0.9 oz., 20 denier, ripstop nylon
• Insulation: 800 fill power goose down
• Weight: 21.5 ounces (0.61 kg)
• Temperature Rating: 25°-30° F (-4° C)

Mt Washington 3

• Length: 77 inches (1.96 m)
• Width: 42 inches (1.07 m)
• Loft: 2.5 inches (7.6 cm)
• Material: 0.9 ounces, 20 denier, ripstop nylon
• Insulation: 800 fill power goose down
• Weight: 21 ounces (0.59 kg)
• Temperature Rating: 25° – 30° F (-7° C)

[Vanhalo]

I think I found my answer on a cached webpage.

Cached Page

Unlike JRB's other quilt models, the MWUQ has a dual-differential cut so it shapes to the hammock and a series of darts on the outer shell to keep the loft from compressing no matter how tightly it is snugged to the hammock. It is made from 1.1 oz ripstop DWR nylon with 800fp down with 3" (7.6 cm) baffles and overstuffed to 4-5" (10.2-12.7 cm) of loft, and uses the standard JRB suspension system to attach to any hammock style. It comes standard with a large JRB compression sack.