Page 1 of 2 12 LastLast
Results 1 to 10 of 14
  1. #1
    TZBrown's Avatar
    Join Date
    Jul 2008
    Location
    Fenton, Michigan
    Hammock
    DIY,Speer,Tbird, JRB
    Tarp
    HG CF, MacCat, GG
    Insulation
    HG,JRB,Speer,UGQ
    Suspension
    numerous, seasonal
    Posts
    1,697

    Single line suspension using UCR?


    Has anyone tried using a single line suspension using a UCR to support the hammock? Possibly with Zing it as a fixed ridgeline?

    I have searched a lot of threads and not found this yet
    I have found the Single line used with rings and a clove hitch at the rings.

    If the UCR was weighted as in some of the other threads would it work and hold well?

    Just thinking..

    TZ

  2. #2
    Senior Member opie's Avatar
    Join Date
    Mar 2009
    Location
    Lansing, MI
    Hammock
    DIY Bridge
    Tarp
    Etowah, gargoyle
    Insulation
    Wool, heater
    Suspension
    Varies
    Posts
    3,414
    Images
    3
    Quote Originally Posted by TZBrown View Post

    Has anyone tried using a single line suspension using a UCR to support the hammock? Possibly with Zing it as a fixed ridgeline?

    I have searched a lot of threads and not found this yet
    I have found the Single line used with rings and a clove hitch at the rings.

    If the UCR was weighted as in some of the other threads would it work and hold well?

    Just thinking..

    TZ
    It has been discussed. I believe there are several folks using this method.

    You can also run a prusik from the tail of the constrictor back, rather than hanging weight off it.
    Custom Bridge Hammocks

    Mackinac Bridge Hammocks

  3. #3
    TZBrown's Avatar
    Join Date
    Jul 2008
    Location
    Fenton, Michigan
    Hammock
    DIY,Speer,Tbird, JRB
    Tarp
    HG CF, MacCat, GG
    Insulation
    HG,JRB,Speer,UGQ
    Suspension
    numerous, seasonal
    Posts
    1,697
    How would you connect the prusik to the constrictor?

    If the prusick was a continuious loop? Possibly build the prusik then join into the loop, after going through the stopper end splice?

  4. #4
    Senior Member opie's Avatar
    Join Date
    Mar 2009
    Location
    Lansing, MI
    Hammock
    DIY Bridge
    Tarp
    Etowah, gargoyle
    Insulation
    Wool, heater
    Suspension
    Varies
    Posts
    3,414
    Images
    3
    Here is how I do it...



    The prusik is longer than it needs to be, but you get the idea.
    Custom Bridge Hammocks

    Mackinac Bridge Hammocks

  5. #5
    TZBrown's Avatar
    Join Date
    Jul 2008
    Location
    Fenton, Michigan
    Hammock
    DIY,Speer,Tbird, JRB
    Tarp
    HG CF, MacCat, GG
    Insulation
    HG,JRB,Speer,UGQ
    Suspension
    numerous, seasonal
    Posts
    1,697
    Are the end loops on the constrictor locked brummels on both ends? Or just burried and sewn on one end?

  6. #6
    Senior Member opie's Avatar
    Join Date
    Mar 2009
    Location
    Lansing, MI
    Hammock
    DIY Bridge
    Tarp
    Etowah, gargoyle
    Insulation
    Wool, heater
    Suspension
    Varies
    Posts
    3,414
    Images
    3
    Quote Originally Posted by TZBrown View Post
    Are the end loops on the constrictor locked brummels on both ends? Or just burried and sewn on one end?
    Both are locked brummels.

    Also, the tail end of the constrictor doesnt need that long of a bury. 2" should be plenty... I have gotten away with 1", but thats getting a little short. To be honest the Marlin Splice (Thanks Mac) is enough for the tail loop.
    Custom Bridge Hammocks

    Mackinac Bridge Hammocks

  7. #7
    Senior Member GrizzlyAdams's Avatar
    Join Date
    Apr 2007
    Location
    Illinois
    Hammock
    DIY Bridge, v0.n, where n is large
    Tarp
    depends on season
    Insulation
    DIY UQ
    Posts
    4,671
    Images
    564
    Quote Originally Posted by opie View Post
    Here is how I do it...
    The prusik is longer than it needs to be, but you get the idea.
    I made a set like that, and changed it after one hang. What bothered me was that to lengthen the suspension by moving the UCR the prusik would get in the way once it reached the bury. Move the UCR a little, move the prusik a little, move the UCR a little....

    I still use the prusik on the line to anchor the UCR but it is no longer attached to UCR. All it takes is a mitten hook to connect the two, the prusik should not be taking any serious pulling.

    Grizz

  8. #8
    TZBrown's Avatar
    Join Date
    Jul 2008
    Location
    Fenton, Michigan
    Hammock
    DIY,Speer,Tbird, JRB
    Tarp
    HG CF, MacCat, GG
    Insulation
    HG,JRB,Speer,UGQ
    Suspension
    numerous, seasonal
    Posts
    1,697
    I like the hook idea so the prusik can be moved farther / easier and the ucr can then be moved farther also.

  9. #9
    Senior Member opie's Avatar
    Join Date
    Mar 2009
    Location
    Lansing, MI
    Hammock
    DIY Bridge
    Tarp
    Etowah, gargoyle
    Insulation
    Wool, heater
    Suspension
    Varies
    Posts
    3,414
    Images
    3
    Quote Originally Posted by GrizzlyAdams View Post
    I made a set like that, and changed it after one hang. What bothered me was that to lengthen the suspension by moving the UCR the prusik would get in the way once it reached the bury. Move the UCR a little, move the prusik a little, move the UCR a little....

    I still use the prusik on the line to anchor the UCR but it is no longer attached to UCR. All it takes is a mitten hook to connect the two, the prusik should not be taking any serious pulling.

    Grizz
    Nice solution Grizz!!!!!!
    Custom Bridge Hammocks

    Mackinac Bridge Hammocks

  10. #10
    Senior Member Frawg's Avatar
    Join Date
    Jan 2009
    Location
    Dayton, OH area
    Hammock
    DIY (various)
    Tarp
    DIY 5x10 pseudocat
    Insulation
    GI+
    Suspension
    UCR custom
    Posts
    1,709
    Images
    95
    Quote Originally Posted by TZBrown View Post

    Has anyone tried using a single line suspension using a UCR to support the hammock? Possibly with Zing it as a fixed ridgeline?

    I have searched a lot of threads and not found this yet
    I have found the Single line used with rings and a clove hitch at the rings.

    If the UCR was weighted as in some of the other threads would it work and hold well?

    Just thinking..

    TZ
    Sorry I missed this earlier. Not sure this is what you meant, but here's what I did back in July:

    - Frawg

    {generic tagline}

Similar Threads

  1. Single Line Suspension (SLS)
    By headchange4u in forum Suspension Systems, Ridgelines, & Bug Nets
    Replies: 164
    Last Post: 07-02-2015, 10:33
  2. My take on single line suspension
    By Rekay in forum Suspension Systems, Ridgelines, & Bug Nets
    Replies: 13
    Last Post: 10-25-2013, 13:34
  3. Help with a new Single line suspension idea.
    By randomsteve95370 in forum Suspension Systems, Ridgelines, & Bug Nets
    Replies: 26
    Last Post: 09-04-2013, 12:42
  4. Best way to attach to a single line suspension
    By Bitts in forum Suspension Systems, Ridgelines, & Bug Nets
    Replies: 8
    Last Post: 07-09-2011, 14:50
  5. Single Line Suspension Whoopified
    By KMACK in forum Suspension Systems, Ridgelines, & Bug Nets
    Replies: 5
    Last Post: 12-23-2009, 19:40

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •