Tensa Outdoor and the commercial packable tensahedron stand

**curlymaple42** · 07-16-2019, 16:19

Originally Posted by Crazytown3

@curlymaple that's kooky! Did the foot end screw pull out at all? Or do you just attribute it to the verticalness of the tether?

Oh yes, orange screw launched like a trebuchet and the tarp stakes on the foot end were like missiles!

Sent from my Pixel 2 XL using Tapatalk

**curlymaple42** · 07-16-2019, 16:20

Originally Posted by Shug

Yessir...that tether need to be at a larger angle for sure!
Move it more thn a couple of feet if you can. Be Taco-Free!
Shug

I have now experienced what you recorded for YouTube. It was quite exciting!

Sent from my Pixel 2 XL using Tapatalk

**OCDave** · 07-16-2019, 16:46

The Tensahedron Taco is by far the most spectaucalr way to drop 12-18 inches I have ever experienced.

**raftingtigger** · 07-16-2019, 16:48

Originally Posted by brutalguyracing

Sweet
Any timeframe for these to be released
Going to make some anyway as I already have the rod
Very Rocky in PA can barely get a nail in more then a few inches
Not really a game changer as I can always use the bike or my truck as an anchor
But it would limit the places available, this is why I am.looking for other options
And i love seeing how others do it

Sent from my E6810 using Tapatalk

The materials for the first batch of booms is here and construction has begun. Now we have to decide if we will sell them solo, or only bundled with an appropriate spike.

**curlymaple42** · 07-16-2019, 17:58

Where the pole is is where the anchor ripped out. Is the new angle ok? I mean, it held of course.

Sent from my Pixel 2 XL using Tapatalk

**raftingtigger** · 07-17-2019, 12:41

Originally Posted by curlymaple42

Where the pole is is where the anchor ripped out. Is the new angle ok? I mean, it held of course.

Sent from my Pixel 2 XL using Tapatalk

Much better where it is. Think about it, how do we remove regular anchors? Straight up!

**rasidi** · 07-18-2019, 00:35

Originally Posted by raftingtigger

The materials for the first batch of booms is here and construction has begun. Now we have to decide if we will sell them solo, or only bundled with an appropriate spike.

Any pictures available? Is it similar to the Alamosa Anchors?

Sent from my SM-N950F using Tapatalk

**raftingtigger** · 07-18-2019, 12:51

Originally Posted by rasidi

Any pictures available? Is it similar to the Alamosa Anchors?

Sent from my SM-N950F using Tapatalk

The booms are identical to the alamosa anchors I was selling under TiggzCraftworkz. The stakes will be either 30cm (12") titanium or 40cm titanium. They are heavier, but MUCH better, than the aluminum SS reinforced ones that I was selling.

30 cm ti stakes will be available as soon as we put them on the website. 40 cm take longer to arrive and will be avail in about a month, maybe earlier.

**BradA72** · 07-18-2019, 14:43

Originally Posted by raftingtigger

The materials for the first batch of booms is here and construction has begun. Now we have to decide if we will sell them solo, or only bundled with an appropriate spike.

Hopefully you will sell them both with the spikes or without. I have some of the 30cm spikes I’d like to try first and then if I need more spike get the 40cm.

**jdy98p** · 07-18-2019, 17:55

Originally Posted by raftingtigger

The booms are identical to the alamosa anchors I was selling under TiggzCraftworkz. The stakes will be either 30cm (12") titanium or 40cm titanium. They are heavier, but MUCH better, than the aluminum SS reinforced ones that I was selling.

30 cm ti stakes will be available as soon as we put them on the website. 40 cm take longer to arrive and will be avail in about a month, maybe earlier.

Will these be replacing the Orange Screws once you have them in stock?

Sent from my iPhone using Tapatalk