Results 1 to 10 of 10
  1. #1
    Senior Member Slackdaddy's Avatar
    Join Date
    Jun 2009
    Location
    MD
    Hammock
    DH Darien, WBBB XLC, 6 HH
    Tarp
    HH Hex
    Insulation
    DIY Climashield (5
    Suspension
    Cinch buckle strap
    Posts
    352
    Images
    4

    Pad material for inbetween layers

    WBBB XLC (DBL Layer), Son just got it to replace the HH Explorer he could never get 100% comfy in.
    Not going to sew up an UQ till we are 110% sure the XLC is the ticket.

    I want to by a foam pad to slip in-between the layers for our summer trips till I get the time to sew an UQ.
    Looking at nighttime temps in the mid to low 60's.
    He is a side sleeper and like a stiff hammock.

    I was looking at 1/4" CCF from foam companys,, but what type of foam?
    Polyethylene? Cross linked? EVA? Density?
    Open cell? Closed cell?

    Looking at 1/4" 48"x 108" for 16.99,, At that size, I could cut it to fit the asym lay.
    http://www.thefoamfactory.com/closed...yethylene.html

    Am I barking up the wrong tree?
    Thanks,
    Slack

  2. #2
    ObdewlaX's Avatar
    Join Date
    Nov 2016
    Location
    Deep In The Heart of...
    Hammock
    SLD Trail Lair, Chameleon
    Tarp
    Dutch Hexon
    Insulation
    Loco Libre, HG
    Suspension
    Spider Web 1.5's
    Posts
    589
    Images
    115
    Quote Originally Posted by Slackdaddy View Post
    I was looking at 1/4" CCF from foam companys,, but what type of foam?
    Polyethylene? Cross linked? EVA? Density? Open cell? Closed cell?
    This may work for you... Gossamer Gear 1/4" hammock pad

  3. #3
    all secure in sector 7 Shug's Avatar
    Join Date
    Oct 2007
    Location
    Minnesota
    Hammock
    I have many so....
    Tarp
    Blackcrow DIY Tarp
    Insulation
    FrankenquiltUQ/Pod
    Suspension
    Whoopie Slings
    Posts
    21,436
    Images
    62
    I find this REI Flash pad pretty comfy in a hammock.
    And yes, the Gossamer Gear foam pad is pretty supple.
    Shug





    Lollygag Life Hammock Shirt... https://teespring.com/lollygaglifete...id=46&cid=2754
    and Mug......https://teespring.com/lollygag-life-...658&cid=102948

    Whooooo Buddy)))) All Secure in Sector Seven

  4. #4
    Senior Member Slackdaddy's Avatar
    Join Date
    Jun 2009
    Location
    MD
    Hammock
    DH Darien, WBBB XLC, 6 HH
    Tarp
    HH Hex
    Insulation
    DIY Climashield (5
    Suspension
    Cinch buckle strap
    Posts
    352
    Images
    4
    Too narrow, to short, and WAY to expensive.
    Any idea "what" type of foam it is?

    The link in the OP has 1/4" 48" x 108" for 17.99 - 24.99,, just not sure which foam type would be correct.

    Quote Originally Posted by ObdewlaX View Post
    This may work for you... Gossamer Gear 1/4" hammock pad

  5. #5
    all secure in sector 7 Shug's Avatar
    Join Date
    Oct 2007
    Location
    Minnesota
    Hammock
    I have many so....
    Tarp
    Blackcrow DIY Tarp
    Insulation
    FrankenquiltUQ/Pod
    Suspension
    Whoopie Slings
    Posts
    21,436
    Images
    62
    Quote Originally Posted by Slackdaddy View Post
    Too narrow, to short, and WAY to expensive.
    Any idea "what" type of foam it is?

    The link in the OP has 1/4" 48" x 108" for 17.99 - 24.99,, just not sure which foam type would be correct.
    It is closed cell cross-linked Evazote foam.
    Lollygag Life Hammock Shirt... https://teespring.com/lollygaglifete...id=46&cid=2754
    and Mug......https://teespring.com/lollygag-life-...658&cid=102948

    Whooooo Buddy)))) All Secure in Sector Seven

  6. #6
    Senior Member Slackdaddy's Avatar
    Join Date
    Jun 2009
    Location
    MD
    Hammock
    DH Darien, WBBB XLC, 6 HH
    Tarp
    HH Hex
    Insulation
    DIY Climashield (5
    Suspension
    Cinch buckle strap
    Posts
    352
    Images
    4
    Thanks,
    I found some X linked PE 1/4" in 60" x 7' for ~24.00,, I should be able to trim that up to cover the asym of the WBBB XLC

    [QUOTE=Shug;1892350]It is closed cell cross

  7. #7
    New Member
    Join Date
    Feb 2019
    Location
    Torrance, CA
    Hammock
    DH Darien
    Tarp
    HummingbirdPelican
    Insulation
    HG Incubator 30
    Suspension
    SMR
    Posts
    14
    Quote Originally Posted by Slackdaddy View Post
    Thanks,
    I found some X linked PE 1/4" in 60" x 7' for ~24.00,, I should be able to trim that up to cover the asym of the WBBB XLC
    Could you share where you got it? How is it working for you? Warm enough?

  8. #8
    Senior Member
    Join Date
    Aug 2014
    Location
    Canton, GA
    Hammock
    WBRR / WBXLC
    Tarp
    DIY 13' Silpoly
    Insulation
    DIY Costco/Synth
    Suspension
    Straps/Buckles
    Posts
    120
    I’d like to know the differences; there’s a lot of conflicting information on foam types - specifically the performance of each of the different types. Apprently there’s a big difference Iin performance among them. Foambymail.com has several varieties. I actually like CCF for its cost savings, weight, comfort in a bridge, and bomb-proofness.
    If anyone could share their experience with some of these different foams that would be great.
    Last edited by Peabody; 03-21-2019 at 13:12.

  9. #9
    OlTrailDog's Avatar
    Join Date
    Oct 2013
    Location
    Corvallis/Stevensville, MT
    Hammock
    Hammocktent 90*, Sparrow, WBBB XLC
    Tarp
    light & waterproof
    Insulation
    Ongoing experiment
    Suspension
    Ongoing experiment
    Posts
    1,370
    When I was researching this topic for myself, I came up with Evazote foam is the penultimate at least at that time. It uses nitrogen in generating the cells. If I remember correctly it was developed in the UK. It use to be called "hard man" pads since it was favored by climbers for the insulation and toughness when it counted. There were some folks that had it like GG and Nuntak, and MEI in Canada. I wanted 1/2" stuff and not the too thin stuff. I finally found what I wanted on ebay sold by a company called Multimat in the UK. It is 25" wide so it works great with a hammock. There are also some bulk places that specialize in the various types of foams including CCF and even Evazote that are on the web. Plus, some Marine, aka boating, equipment places that sell it for repairing/making Marine furniture padding.

    In fact right now the pad is between the double layers of my DH Sparrow that I recently have been sleeping in (I like to change it up between the WBBB XLC and Hammocktent 90). What I like about it between the layers is it rough enough to really stick in place on the diagonal. I have also been using an Exped Regular Synmat on top of the Sparrow. The Exped is slick enough that when I climb into the hammock I can scooch the Exped into the diagonal with my heels just off the end and adjust fore and aft to where I want to be. During the adjustment and beyond the Multimat sticks right where it belongs on the diagonal.

  10. #10
    Senior Member
    Join Date
    Aug 2014
    Location
    Canton, GA
    Hammock
    WBRR / WBXLC
    Tarp
    DIY 13' Silpoly
    Insulation
    DIY Costco/Synth
    Suspension
    Straps/Buckles
    Posts
    120
    Great info, thanks!
    This is a great resource:
    https://backpackergeek.wordpress.com...m-pads-part-2/
    Last edited by Peabody; 03-21-2019 at 20:32.

  • + New Posts
  • Similar Threads

    1. Hammock Straps: Tack stitch vs. Box X stitch...and everything inbetween
      By Bcarrawa in forum Suspension Systems, Ridgelines, & Bug Nets
      Replies: 30
      Last Post: 03-07-2017, 09:00
    2. WBBB DL UQ Between Layers
      By Hangandy in forum Warbonnet Hammocks
      Replies: 7
      Last Post: 05-29-2011, 19:23
    3. IX between the layers?
      By amac in forum Bottom Insulation
      Replies: 8
      Last Post: 10-21-2010, 16:30
    4. IX between layers?
      By the2nddeal in forum Bottom Insulation
      Replies: 2
      Last Post: 06-06-2010, 12:20

    Bookmarks

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •