Results 1 to 2 of 2
  1. #1
    Senior Member
    Join Date
    Dec 2009
    ENO Doublenest
    GG 12x12
    DIY down quilt
    whoopies & webbing

    First test hang: success

    Today's a nice day, and I finished sewing loops in my tree huggers last night, so I did some test hanging.

    I'm happy to report everything went off without a hitch. I hung the hammock from my newly built pergola. It uses 6x6 posts, and the short side is about 14' wide. I figured doing it in a controlled setting like this would go off a bit easier than trying to find the right two trees in the woods at the back of the yard for a test hang.

    I'm using a whoopie sling/tree hugger setup with a couple of SMC rings, too.

    Here's the basic setup:

    Tree huggers with a marlinspike hitch. Toggles are pieces of a fiberglass reflector pole from Lowes. Also, whoopies.

    Whoopies then attach to SMC rings.

    Also attached to the rings would be the structural ridgeline, hammock, and drip lines.

    Tarp suspension.

    Nothing special here yet. Guide Gear 12x12 tarp, continuous cord and tarp attached to the cord with prussiks and micro biners.

    The hammock sag when hanging from these posts is about perfect, so I set my ridgeline length for this distance. I have plenty of length on all my suspension bits to hang between trees farther apart than this. In fact, my whoopies are cinched ALL THEY WAY down

    The fiberglass rod bits seem to work well for toggles. I got some splintering when I made one cut, however, and I dipped those ends in plasti-dip to prevent the rod from splintering me later on. But I like the bright orange so I can see 'em if they fall into the duff on the ground.

    The GG tarp is too big to hang on the diagonal here, however, so I couldn't test it out completely. I found that I could set it up in a sort of 'porch mode' being that there's no tie-outs in the middles of the sides. I still didn't have quite enough room to stretch the tarp out like that due to the pergola's structure. At least it can still be done. Looks like the MSR Groundhog stakes only do any good in the local soil if I push 'em in as deep as possible. The loose sand just moves around too much. I'd really rather not use bigger stakes unless I have to.

    I find the ENO doublenest quite comfortable. I could totally sleep in it very easily. I think I'm going to like the hammock thing.

    Unfortunately, html no workie here. I will only upload my photos once, so you can see 'em here:
    Last edited by mtbikernate; 03-17-2010 at 17:26.

  2. #2
    Senior Member JerryW's Avatar
    Join Date
    Jul 2009
    West Central Illinois
    DIY 11' & Bridge
    DIY Hex/Grizz Beak
    DIY UQ and TQ
    Whoopie Slings
    Glad it all worked out for you!

    There is a group on Flickr for Camping Hammocks. Check it out, you might want to add some of your pics to it.

    The "Search" function is your friend!

Similar Threads

  1. Sil Argon Tarp Snakeskin + Pole Mod test: partial success
    By Insaniac99 in forum Weather Protection
    Replies: 9
    Last Post: 06-23-2014, 18:12
  2. First test; a success
    By tygr in forum Trip Reports
    Replies: 4
    Last Post: 03-12-2012, 19:43
  3. Wbbb Test Flight Mission Success!!!
    By SwampFoot in forum Trip Reports
    Replies: 12
    Last Post: 04-25-2011, 17:14
  4. SS test with windshield reflector--Success!
    By bonsaihiker in forum Hennessy Hammocks
    Replies: 10
    Last Post: 04-15-2009, 17:48

Tags for this Thread


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts