That’s cool! It’s always fun to design things that solve a problem. Or even just for the fun of making it. Glad to see it works. I don’t have a chair but could see this solving a lot of problems!
That’s cool! It’s always fun to design things that solve a problem. Or even just for the fun of making it. Glad to see it works. I don’t have a chair but could see this solving a lot of problems!
I have a second ultralight version must be printed with flexible material, I use TPU 95A, weights around 10g/foot
helinox.jpeghelinox tpu.JPG
Sioux Hustler Trail 2020, Angleworm Trail, 2021, PowWow Trail clearing 2021, and any weekend overnight I can get.
I finally went with 3rd iteration where I removed original feet completely and substitute them with my version of TPU feet. This way it is definitely better than the original with no weight penalty. Tested on loose ground in the woods and I’m happy with the stability.I wouldn’t be scared of compact snow but on loose dry sand like on the beach ground cloth provides more stability for sure.
IMG_0790.jpeg
I 3d printed ball feet for my Helinox cheap copy, just replaced the rubber feet completely, still fits in the bag and works really well
Bookmarks