Hey folks, I've been sifting through about 15 years of stuff in storage, and I ran across my TATO hammock stand kit from back in 2016. This would have been the original Kickstarter version of the hardware kit where you had to provide your own legs and top rail (I used 75" lengths of EMT conduit for the legs, which I still have, but I'm not sure what happened to the top rail I was using). I'd like to get this baby up and running again with my WBRR. I think these are all of the pieces, with the exception of the top rail plug that would have allowed you to attach two shorter sections together to make the entire top rail. So I guess instead of that I'll have to go buy one long piece to use as a top rail. Also, not pictured here are the 6 rubber feet caps which I do have; they are currently attached to the legs which I didn't take a picture of.
tato01.jpg
tato02.jpg
In examining what I've got here, it appears that one of these two yellow loops apparently broke at some point. These loops are for tarp tie-outs, correct? Does anyone know what kind of line this is (is it Zing-It? and what diameter was used?), and secondly, how would I go about fashioning a replacement loop? I can't tell what kind of knot has been applied to the other loop that's intact, since it's covered up by the black shrink-tubing.
Bookmarks