Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 21

Thread: Redesigned TRL

  1. #11
    Senior Member LostCause's Avatar
    Join Date
    Jul 2008
    Location
    Houston, Tx
    Hammock
    WBBB; Bridge in progress
    Tarp
    DIY Hex
    Insulation
    Short UQ/pad combo
    Suspension
    Whoopie Slings
    Posts
    689
    Images
    19
    I used a spliced loop and for the knot I used a zeppelin bend. I used about 20" of cordage. 2" extra just in case....
    1" backsplice on both ends (2")
    1/2" tails on the knot (1")
    1 1/2" for the knot on each end (3")
    3" fixed length between the loop splice and the knot
    1" loop
    2" length loop to the prusik
    5" for the prusik
    1" length from the prusik to the knot

    Grand total of 18"
    Works pretty well in my limited experience.

  2. #12
    opie's Avatar
    Join Date
    Mar 2009
    Location
    Lansing, MI
    Hammock
    DIY Bridge
    Tarp
    Etowah, gargoyle
    Insulation
    Wool, heater
    Suspension
    Varies
    Posts
    3,412
    Images
    3
    LC and Lone... Thanks for the pics.

    I do intend to offer this as an option, soon. It was on my mind as I was going through the redesign. I think for something like the TRL.... No complicated stopper is needed.... there isnt that much tension on the TRL.
    Custom Bridge Hammocks

    Mackinac Bridge Hammocks

  3. #13
    Senior Member GvilleDave's Avatar
    Join Date
    Feb 2009
    Location
    Greenville SC
    Hammock
    DIY Camo Cocoon
    Tarp
    Tricked out SWT
    Insulation
    DIY 4 layer IX
    Suspension
    straps & buckles
    Posts
    528
    Images
    185
    Thanks to Opie for the great ideas! I like the idea of using the KnotBone! It is small, easy to use and holds well. I modified the way to attached the loop of the ridgeline on mine so that most of the ridgeline loop is hidden inside the KnotBone.

    [IMG][/IMG]

    [IMG][/IMG]

  4. #14
    opie's Avatar
    Join Date
    Mar 2009
    Location
    Lansing, MI
    Hammock
    DIY Bridge
    Tarp
    Etowah, gargoyle
    Insulation
    Wool, heater
    Suspension
    Varies
    Posts
    3,412
    Images
    3
    Looks good!!!
    Custom Bridge Hammocks

    Mackinac Bridge Hammocks

  5. #15
    Callahan's Avatar
    Join Date
    Dec 2010
    Location
    BC, Canada
    Hammock
    WB Ridgerunner, dbl 1.0 BB, Bias WW
    Tarp
    HG Custom 4S
    Insulation
    WB Lynx, HG, MB
    Suspension
    DIY Whoopies
    Posts
    1,083
    Just wondering, how do you attach the zing-it to the knotbone? Do you use a fixed eye splice and sew it, or do you attach it with a locked brummel? I would like to put together a ridgeline for my superfly similar to Opie's design with the knotbone and figure 9, as well as some 8 ft lengths with fixed loops for girth hitching on the tarp tie outs. I have searched the forum, and watched Opies great locked brummel post for amsteel, but can't find anywhere that explains what measurements I would need for completing the locked brummel using zing-it.

    Thanks!

    Callahan

  6. #16
    SmokeBait's Avatar
    Join Date
    Sep 2009
    Location
    Defiance, Missouri
    Hammock
    Warbonett BB 1.1 DL
    Tarp
    BWDD Winter Dream2
    Insulation
    Winter Crowsnest
    Suspension
    whoopieslings.com
    Posts
    1,531
    Callahan, it's a fixed eye with a locked brummel. Line runs lengthwise down the center hole of the Knotbone. First mark is at 2" from the end. 2nd mark where the threader goes through is at 6" from the end. Loop is pulled tight against the Knotbone, locked and buried.

  7. #17
    Callahan's Avatar
    Join Date
    Dec 2010
    Location
    BC, Canada
    Hammock
    WB Ridgerunner, dbl 1.0 BB, Bias WW
    Tarp
    HG Custom 4S
    Insulation
    WB Lynx, HG, MB
    Suspension
    DIY Whoopies
    Posts
    1,083
    Quote Originally Posted by SmokeBait View Post
    Callahan, it's a fixed eye with a locked brummel. Line runs lengthwise down the center hole of the Knotbone. First mark is at 2" from the end. 2nd mark where the threader goes through is at 6" from the end. Loop is pulled tight against the Knotbone, locked and buried.
    Perfect! Thanks for the help Smokebait

    Cheers

  8. #18
    Callahan's Avatar
    Join Date
    Dec 2010
    Location
    BC, Canada
    Hammock
    WB Ridgerunner, dbl 1.0 BB, Bias WW
    Tarp
    HG Custom 4S
    Insulation
    WB Lynx, HG, MB
    Suspension
    DIY Whoopies
    Posts
    1,083
    Thanks to Opie, SmokeBait and all for all the help and great tuturorials! Built my continuous ridgeline last night and completed my first splices...Can't wait to try this on my Superfly!

    Cheers
    Attached Images Attached Images

  9. #19
    Senior Member
    Join Date
    Mar 2010
    Location
    Washington State
    Hammock
    Warbonnet Blackbird 1.0dbl
    Tarp
    Zpack Cuben w/door
    Insulation
    Incubator
    Suspension
    The Force
    Posts
    469
    Callahan looks good! You know you don't need the S biners. You could girth hitch your prussic to your tarp and have fewer pieces that can come undone (which means get lost to me). Nice splices.
    Bat
    Beginning my NOBO trip on the AT on 2/28/12.

  10. #20
    SmokeBait's Avatar
    Join Date
    Sep 2009
    Location
    Defiance, Missouri
    Hammock
    Warbonett BB 1.1 DL
    Tarp
    BWDD Winter Dream2
    Insulation
    Winter Crowsnest
    Suspension
    whoopieslings.com
    Posts
    1,531
    Looks good Callahan. That should serve you well.

Similar Threads

  1. Redesigned Snipe?
    By Sidewinder in forum Wilderness Logics
    Replies: 5
    Last Post: 08-05-2012, 06:25
  2. Redesigned Dutch Clips
    By Peter_pan in forum Jacks-R-Better
    Replies: 3
    Last Post: 09-30-2010, 17:03

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •