Thanks Hawk-eye!
I tried to be careful not to single out any manufacturer specifically, but I did mention in the short write-up that after-market doors are available:
"Some manufacturers sell "doors" as an optional add-on to common hex or cat-cut tarps."
I tried to make the illustration and write-up as basic as possible without focusing too much on one particular method or design. Just like hammocks, there are multiple ways to tie one up, and I covered a few for illustrative purposes.
Ouch TeeDee Only a 3?
My other illustration about rigging tarps covers prusiks a little better, I think, but you're right that this illustration is purposly light when it comes to _rigging_ a tarp. My intent was to give a basic primer on the subject. Like hammocks, there are numerous ways to rig it up, and I didn't want to slight anyone by focusing too specifically. I do list a few options, including prusiks, more for illustration purposes.
It is hard to design something this concise and still cover all the possibilities without stepping into the "Advanced Tarp Techniques" realm.
I went to a Boy Scout advanced backcountry training where one instructor had rigged a sophisticated tarp that included a modular guyline system and a full-length ridgeline with built-in, automatic safety release points, in case of hurricane-force winds, so the tarp would collapse instead of ripping into threads. The whole group was in awe, including myself, on this complicated rigging. I took pictures, wrote notes, and to this day, I still have no idea how to duplicate the instructors technique.
This has nothing to do with your ridgeline suggestion, but I hope it helps clear up why I had to stop somewhere. A good illustration loses its ability to communicate a clear message when there are so many options that there are no options.
I want to use any suggestions to make this illustration stand on its own for some time and weather any trends in technique. Last year, woopie slings were unknown but to arborists, and now they are the new hammock fad. I don't think single ridgelines with prusiks will go away any time soon, but I hope the little nod I gave is enough to hint that there is more to learn on the subject of tarp rigging. This illustration is just a starting point, not the definitive guidebook.
Is that long-winded explanation enough to get a 5 rating?
What? Nobody recognized Cannibal? And after all that work...
Of course we did! But there is no room in your chart, so we can't run the risk of you needing to portray the head larger than at present!
You never cease to amaze me my friend. That thing probably took you less than one night's work. It would have taken me..well, forever. Great work!!
~Stormcrow
Owner/Founder at Hammockgear.com - Hammock Camping Outfitters
Home of the Burrow, the Incubator, and the Phoenix
Looks Great! The only problem with the little Cannibal dude is that he only has one hammock
Arrowhead Equipment -- For all your hammock camping and backpacking gear
Arrowhead-Equipment.com Visit AHE on Facebook Follow us on Twitter Check out pictures on Instagram
Sign Up for Arrowhead-Equipment Gear News: Click Here
As I said, I'm biased and think that the full length ridge line deserves more respect .
The art work is gorgeous and many times I have wished I had that kind of talent. But content is important also.
I printed out the graphic and it only fills slightly over half of an 8.5"x11" sheet. So that leaves a lot of room for expansion without clutter.
Heck at that rate you could even fill the bottom half of the page with a single graphic detailing the full length ridge line with Prussics My bias showing again
Those who sacrifice freedom for safety, have neither.
Do not dig your grave with your teeth. (Unknown)
I seeeee
Well, actually, both images are scaled at 8.5x11 @ 300 DPI, but reduced for the web. I'm glad it is legible at half size, but the call-out fonts are at 10 pts, and appear even smaller when reduced on the web. Reducing any smaller would make the text illegible on the web, but probably suitable for print.
I can see that you're just going to be a grump and hard to please. That's okay; I've dealt with tougher clients in my line of work You're looking for more "meat" when I'm insisting that these illustrations are just "milk" -- granted, single-line ridgelines might seem like "milk" to most, but it's just another level of detail that does introduce too much bias; something I'm trying to avoid (artistic neutrality, see?).
Perhaps my next series of graphics will tackle more advanced topics and techniques, which may satisfy the bias in you -- perhaps. My next drawing will be to talk about insulation basics.
voodoo stick
You need to put high res versions of these on zazzle or one of the other sites and make yourself a few bucks.
Bookmarks