Oh, never mind. Here we go: http://www.hammockforums.net/gallery...imageuser=4633
Nice to see it actually done (and nice guitar in the photo series!)
When I was younger, and living with mom and dad... I used 3/8" welded eye screws in the top plate of the room. To reach that, I drilled a 1/4" pilot hole into the upper corner where the wall and ceiling met.
It held my 135#, 5'11" frame on a hammock... but then.. I was really light... 25 years ago...
Knotty, thanks for the link to that bracket. I don't need one yet but nice to know they are out there.
YES. An eye-screw should hold you. I'm 200 lbs and I use them for my outdoor hangs, from a 4X4 post in the garden to the corner of the tool shed, and on the front porch 4X4 to one sunk into a stud in the wall of the house. I use stainless steel ones. They are stronger, and being outdoors, they don't rust. 5/16th ones word well, just make certain they're centered in the stud. I have bent out 1/4 inch plain eye screws, tho.
I used these with lag bolts based on another HF member's recommendation, and it is working out just fine. Spreads the load a bit, plus they look much nicer on the wall than an eye bolt (but pricier).
“Simplicity in all things is the secret of the wilderness and one of its most valuable lessons. I think the matter of simplicity goes further than just food, equipment, and unnecessary gadgets; it goes into the matter of thoughts and objectives as well. When in the wilds, we must not carry our problems with us or the joy is lost.” -Sigurd Olson
CLICK HERE to add your name to the world wide H F member location list. And Thank You!
" just jump in where you can and hang on!" - briscoe darling
___WildernessLogics ROCKS !____
"My indoor mayan setup. Wall hook is a plate mounted hitching ring setup with the ring cut out and replaced by a pin shackle. Plate is mounted to wall where there are two adjacent studs with weight rated screws."
My .02, you're putting holes in the wall anyway, what's the worst that could happen? Whatever you screw into the wall might come out, along with a little sheetrock or whatever your wall is made of, but there was already going to be a hole in the wall. I liked the idea of a previous poster to mount a 2x6 or so on the wall across several studs and then put a shelf on top. A little sanding, routing and some stain or paint and it might be a nice addition to the room.