Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Safety Pins ?

  1. #1
    Senior Member
    Join Date
    Sep 2008
    Location
    Auburn, MA
    Hammock
    JRB BMB
    Tarp
    JRB 11'x10'
    Insulation
    JRB TQ / UQ set
    Suspension
    JRB tri-glide
    Posts
    405

    Safety Pins ?

    I have been thinking about using my sleeping bag as an UQ by attaching it to the hammock using 12 safety pins. [4 rows of 3]

    Has anyone ever done this? will it damage the hammock material? the gaps too big?

    Thanks.

  2. #2
    Senior Member SGT Rock's Avatar
    Join Date
    Nov 2006
    Location
    Maryville, TN
    Hammock
    Argon 90 test hammock
    Tarp
    7'x9' cuben tarp
    Insulation
    Pads and quilts
    Suspension
    Kevlar and Amsteel
    Posts
    1,933
    Images
    92
    Hammock bottoms tend to stretch in funny ways. You might hurt it, you won't know until you try.

    I would recommend connecting the "quilt" with some elastic to the suspension and do the pinning to the old bag.
    NO SNIVELING!
    www.hikinghq.net - Hiking H.Q.
    www.bmtguide.com - the BMT Thru Hiker's Guide

  3. #3
    Dutch's Avatar
    Join Date
    Apr 2007
    Location
    Reinholds, PA
    Hammock
    Bridgeskin
    Tarp
    DIY Blackcat
    Insulation
    DIY Quilts
    Suspension
    Whoopie sling
    Posts
    6,841
    Images
    198
    If you can hit the hem you are ok.
    Peace Dutch
    GA>ME 2003


    http://dutchwaregear.com
    Visit Dutchwaregear on facebook (and like it)
    Check us out on Twitter @dutchwaregear

  4. #4
    Senior Member Ramblinrev's Avatar
    Join Date
    Apr 2008
    Location
    Milton, PA
    Hammock
    Hennessey Explorer Ultralight
    Tarp
    Hennessey Hex
    Insulation
    HH Super Shelter
    Suspension
    ring buckle
    Posts
    7,870
    Images
    101
    I am unclear as to the benefit of the safety pins. I am all thumbs at best and the prospect of pinning the quilt to the hammock sends me into a tailspin. I run elastic to the suspension lines and hook to a biner. Once the initial adjustment is done it is an easy installation in the dark without a headlamp. Try that with safety pins. But if you see a benefit then it might be worth playing around with. But I think if I was going to test it I would want a scrap hammock to rest it on.
    I may be slow... But I sure am gimpy.

    "Bless you child, when you set out to thread a needle don't hold the thread still and fetch the needle up to it; hold the needle still and poke the thread at it; that's the way a woman most always does, but a man always does t'other way."
    Mrs. Loftus to Huck Finn

    We Don't Sew... We Make Gear! video series

    Important thread injector guidelines especially for Newbies

    Bobbin Tension - A Personal Viewpoint

  5. #5
    Senior Member
    Join Date
    Jul 2010
    Location
    E. CT
    Posts
    156
    Don't use safety pins. They damage fabric and aren't that reliable under pressure. Velcro?

  6. #6
    Senior Member Poppabear's Avatar
    Join Date
    Dec 2009
    Location
    Lexington Park, MD
    Hammock
    Warbonnet Blackbird 1.7
    Tarp
    Zpacks Cuben Fiber
    Insulation
    Leigh's UQ
    Suspension
    Whoopies/Treestrap
    Posts
    2,643
    As a thought using the spring loaded paper clips. I believe they are called bulldog clips.
    Terry

  7. #7
    Senior Member slackmacker's Avatar
    Join Date
    Aug 2010
    Location
    Omaha, NE
    Hammock
    Grand Trunk Travel, Parachute
    Tarp
    Noah 12
    Insulation
    A work in progress
    Suspension
    noose
    Posts
    124
    I have thought about using some tarp clamps, they would pinch on to my bag in 3 or 4 locations on each side and then run some cord through them. I wave not tried it but I think it will work with out hurting my bag any.

    http://www.cheaperthandirt.com/CAMP099-1.html

  8. #8
    Senior Member SGT Rock's Avatar
    Join Date
    Nov 2006
    Location
    Maryville, TN
    Hammock
    Argon 90 test hammock
    Tarp
    7'x9' cuben tarp
    Insulation
    Pads and quilts
    Suspension
    Kevlar and Amsteel
    Posts
    1,933
    Images
    92
    If I were going to try attaching anything to the bottom of my hammock again, I would use Grip Clips: http://www.jacksrbetter.com/GripClips.htm

    They work great.
    NO SNIVELING!
    www.hikinghq.net - Hiking H.Q.
    www.bmtguide.com - the BMT Thru Hiker's Guide

  9. #9
    all secure in sector 7 Shug's Avatar
    Join Date
    Oct 2007
    Location
    Minnesota
    Hammock
    DIY GreenBeanHammock
    Tarp
    DIY Tarps/HG Cuben
    Insulation
    Frankenquilt/Pod
    Suspension
    Whoopie Slings
    Posts
    16,025
    Images
    62
    Yeah ..... clips of a sort. Fer Sho'
    Shug
    Whooooo Buddy)))) All Good in the Backwood Hood.

    Shug's YouTube Videos

  10. #10
    Senior Member
    Join Date
    Sep 2008
    Location
    Auburn, MA
    Hammock
    JRB BMB
    Tarp
    JRB 11'x10'
    Insulation
    JRB TQ / UQ set
    Suspension
    JRB tri-glide
    Posts
    405

    Grip Clip Results

    I bought the grip clips.

    It was a little adventure using them becuase I was attaching the pad sleeve of the BA sleeping bag to the pad sleeve of the JRB BMBH. The attaching required my arms deep inside both pad sleeves and attaching without seeing the two parts.

    The sleeping bag doesn't have enough width compared to cover the full underside of the hammock but it worked well enough if I didn't use a pad AND I slept on my side all night.

    The second night I added a sleeping pad in to the pad sleeve of the BMBH to give the hammock a flatter shapeand the system did not well at all.

    That night I slept on my back and my shoulders would occasionally come in contact with uninsulated sides of the hammock. I did get a sense that the pad and bag combo beneath me was working great but that made touching the uninsulated sides even more noticable.

    So the lesson for me was that the width of the insulation needs to match the full half circle of the bridge hammock to be effective.

    I might try this with a wool blanket just so that I can continue to use the hammock thru the Fall as I want for Santa to bring me a Mt Wash 3 UQ.

    The grip clips will see winter duty as shock cord tarp tieouts.

Similar Threads

  1. Sewing With Pins In????
    By headchange4u in forum Do-It-Yourself (DIY)
    Replies: 21
    Last Post: 12-29-2011, 19:40
  2. Momentum90: Any issues with using pins?
    By forgueam in forum Fabrics
    Replies: 3
    Last Post: 08-04-2011, 10:08
  3. no pins, no slide sewing. Ooooh :)
    By grok in forum Do-It-Yourself (DIY)
    Replies: 8
    Last Post: 02-08-2011, 19:28
  4. JRB WS2, 4 yards of IX and some clothes pins
    By wisenber in forum Bottom Insulation
    Replies: 2
    Last Post: 09-24-2010, 14:42
  5. No more pins!
    By jmudler in forum Do-It-Yourself (DIY)
    Replies: 24
    Last Post: 04-13-2010, 12:48

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •