Page 1 of 5 123 ... LastLast
Results 1 to 10 of 46

Hybrid View

  1. #1
    New Member
    Join Date
    Aug 2010
    Location
    Sacramento, CA
    Posts
    47

    Smile Walmart Pad Questions?

    Hello forum,

    First off i want to say that i HAVE read all of the threads on the walmart pad. I just have a few questions:

    1. People say this pad is extremely uncomfortable. How bad could it be?
    2. If you are an experienced hammocker, would you still use this pad and not fork out hundreds of dollars for an underquilt, even if it was a little uncomfortable?

    I have heard people say the REI pad is WAY more comfortable and has the same insulating qualities as the Walmart pad. So, comfort wise, i would consider getting this instead. Thoughts? People claim the WM Pad goes down to NINE degrees with two pads. I find that amazing for the price! It's almost too good to be true. I have a Coleman Inflatable, and i don't seem to slide off of it as much, so i expect the Walmart pad to be somewhat similar. Any additional information about this pad is welcomed and appreciated. I cant get enough information about it!

    Thanks,

    TheTorch.

  2. #2
    Senior Member Mountain Gout's Avatar
    Join Date
    Mar 2010
    Location
    Michigan
    Hammock
    Wbbb 1.1dbl.- Traveler multicam 1.9
    Tarp
    H.G. Cuben camo
    Insulation
    Phinc-burrow- H.R.
    Posts
    1,441
    I have a wally pad, They are very warm for the price, yet condensation comes into the factor and interference of the comfortable hammock lay.. I don't like it.. Sooo I saved up for an uq.. and currently living happily ever after....
    We would be one step closer to world peace, if everyone slept in a hammock..

  3. #3
    New Member mayday's Avatar
    Join Date
    Jan 2011
    Location
    Maryville, TN
    Hammock
    Castaway Double
    Tarp
    Campmor silnylon
    Insulation
    Peapod and pads
    Suspension
    WHOOPIE SLING!!!!!
    Posts
    32
    Its definately a condensation issue rather than padding issue. A Ridgerest, for example is a closed cell foam pad while a pad like you are speaking of is more of a plastic type pad. Its splitting hairs, but its the issue that you will feel clamy if there is not enough moisture escaping.....now this is all my thinking....others and you may be just fine. Even with the "truckers solar shade" there is an issue with moisture.

  4. #4

    Join Date
    Jun 2011
    Location
    Lynchburg, VA
    Hammock
    DIY 1.1 single-layer
    Tarp
    DIY Silnylon Hex
    Insulation
    DIY UQ & SOL Bivvy
    Suspension
    DIY Whoopie slings
    Posts
    590
    Images
    68
    Quote Originally Posted by mayday View Post
    Its definately a condensation issue rather than padding issue. A Ridgerest, for example is a closed cell foam pad while a pad like you are speaking of is more of a plastic type pad. Its splitting hairs, but its the issue that you will feel clamy if there is not enough moisture escaping.....now this is all my thinking....others and you may be just fine. Even with the "truckers solar shade" there is an issue with moisture.
    I wonder why a pad causes a condensation problem in a hammock when it doesn't when used on the ground.

  5. #5
    Senior Member HappyHiker's Avatar
    Join Date
    Aug 2011
    Location
    Lakewood,CO
    Hammock
    DIY DL/HH Hyperlite/WBBB 1.1 DL
    Tarp
    WL Old Man Winter
    Insulation
    HHSS/DIY Down UQ
    Suspension
    Whoopies/Webbing
    Posts
    282
    Images
    22
    Quote Originally Posted by mrmike65 View Post
    I wonder why a pad causes a condensation problem in a hammock when it doesn't when used on the ground.
    I think it's because you have a lot more contact area using it in a hammock- it wraps the back, shoulders/arms and legs. On the ground it touches only contact points on the back, arms and legs.

    Also, less movement while sleeping. I either find myself in the same position I fell asleep in, or at most wake once or twice to shift positions. When sleeping on the ground I move around quite a bit more allowing any condensation to dry that may have accumulated.
    Experience is the worst teacher - it presents the exam first and the lesson later. - Unknown

  6. #6
    New Member
    Join Date
    Aug 2010
    Location
    Sacramento, CA
    Posts
    47
    Is there such a thing as cheap underquilts? I can't imagine paying more than double of what I payed for the hammock. Sigh.

  7. #7
    psyculman's Avatar
    Join Date
    Sep 2007
    Location
    Leominster Ma.
    Hammock
    HH Expd w/ SS UC
    Tarp
    DIY camo
    Insulation
    DIY down UQ @ TQ
    Posts
    328
    Images
    22

    WM pad

    Speaking for the corregated (egg crate) WM pad here, NOT the 'stiff' one WM sells.

    I used spray contact glue to attach 1/4" poly batting to one side of the blue pad, and cut it down to a mummy shape, 22" x 14" x 70" long. Another piece of mylar SB is sewn between two layers of insultex, and, cut the same shape. These layers are all inside a slip cover (same shape) with tabs at each corner which mate with the loops IN EACH corner inside of my sleeping bag. No condensation. Just the poly batting alone would absorb condensation. (prototype tested) Incidently, the less "quilting" through layers of insultex, the better. It gets stiff, like a 'pot holder' when layers are quilted through. Just sewn around the edges works best.

    I have used just this pad system into the teens, but, it seems like it would go a lot lower. Have also used it in conjunction with my UQ to below zero, and was sooooo warm. Just can't give that down UQ though ! The WM pad is a little bulky, but, for winter, it's well worth the extra space it takes up. And, of course it's really inexpensive. A layer of 1/4" poly batting on BOTH sides of the pad might keep it in place, if it were just placed under the hammock in the SS, not sure about that.

    I don't notice any disagreable comfort factor. A night in my hammock is better than sleeping anywhere else, no matter what the "discomfort" might be.
    Never more than one man left behind, so far !

  8. #8
    Syb's Avatar
    Join Date
    Nov 2010
    Location
    Trenton, NJ
    Hammock
    WBBB 1.1 DL/DIY
    Tarp
    OES/WB Superfly
    Insulation
    Incubator/Burrow
    Suspension
    WB Straps
    Posts
    1,797
    Images
    44
    Quote Originally Posted by TheTorch View Post
    Is there such a thing as cheap underquilts? I can't imagine paying more than double of what I payed for the hammock. Sigh.
    Cheap UQ = sleeping bag mod.

    Paying double for a good quality UQ? Absolutely and I'm saving up money for one. I had the opportunity during a group hang to use my pad one night and someone loaned me their UQ to try the next night. The difference was incredible. If I don't have to go back to a pad, I won't. I'm working on some DIY UQ's but after seeing the quality and attention to detail from some of the cottage guys on here, the UQ is worth it's weight in gold. Or down even. But, it always comes down to personal preference.
    Syb
    Enjoy the elevation

  9. #9
    Senior Member KerMegan's Avatar
    Join Date
    Aug 2009
    Location
    Irving, TX
    Hammock
    not quite eno..
    Tarp
    10x12 DIY
    Insulation
    insultex+momentum
    Suspension
    DIY whoopie slings
    Posts
    2,479
    Images
    2
    as always there is a triple of aspects to consider- cost /comfort /compressability
    pick your two favorites..
    (usually it is warm/light/cheap; again, pick 2)
    KM (who is forcibly reminded of the old Irish saying about things coming in threes...)

  10. #10
    New Member
    Join Date
    Aug 2010
    Location
    Sacramento, CA
    Posts
    47
    I think i might go pick one up. Im still not sure about WM or REI though. So, as stated above, one of the ways to stop condensation is to glue on some extra layers of material? Sounds cool anfpd it doesnt require much skill. And whats the deal with cutting pads? I could see it taking less space, but is there any other benefit?

Similar Threads

  1. Newcomer - Questions about HH & basic beginner questions
    By Leebums in forum General Hammock Talk
    Replies: 25
    Last Post: 12-22-2013, 06:01
  2. 2$/yd bin at Walmart nylon help please!:)
    By Armor Like Fire in forum Fabrics
    Replies: 14
    Last Post: 09-25-2013, 00:02
  3. i saw this at walmart
    By valleyrat in forum Fabrics
    Replies: 9
    Last Post: 07-21-2012, 12:49
  4. Walmart Sil
    By ljcsov in forum Fabrics
    Replies: 3
    Last Post: 10-28-2011, 01:47
  5. walmart fabric?
    By stickboy in forum Fabrics
    Replies: 6
    Last Post: 02-09-2010, 17:21

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •