Results 1 to 3 of 3
  1. #1
    Senior Member
    Join Date
    Sep 2009
    Location
    UK
    Hammock
    Warbonnet Blackbird
    Tarp
    Warbonnet Superfly
    Insulation
    HGWinter Incubator
    Suspension
    stock straps
    Posts
    205
    Images
    1

    What type of seam?

    In the pursuit of making more of my own gear, I want to make a TQ for two people to use in a roof tent. I need to join the material due to the width and I'm wondering what type of seam to use. A flat felled seam would be overkill I think - should I just join the two halves together with a running stitch then turn the other way round so the unfinished section is inside? I can't see any real pressure being exerted on that seam but I'd appreciate any advice from those more experienced than me.

  2. #2
    Redoleary's Avatar
    Join Date
    Feb 2009
    Location
    Pennfield Twp, MI
    Hammock
    DIY gathered end
    Tarp
    Hinterland gear
    Insulation
    down bag
    Suspension
    strap & E.T.'s
    Posts
    3,449
    Images
    70
    That depends on the material, if the material can fray, I'd try to enclose it. In which case I would use either the flat felled or a French Seam. With the French seam after you make the actual seam fold to one side and top stitch. Here are some videos on each seam. The french one doesn't cover the top stitch part, but I'm sure you'll get the idea. I think they both use about the same amount of material.... so all things being equal, I'd probably use a flat felled? Hope that helps.

    Good luck,
    RED

    My Youtube Channel

    Deep peace of the running wave to you.
    Deep peace of the flowing air to you.
    Deep peace of the quiet earth to you.
    Deep peace of the shining stars to you.
    Deep peace without end to you.
    adapted from - ancient gaelic runes

  3. #3
    Ramblinrev's Avatar
    Join Date
    Apr 2008
    Location
    Milton, PA
    Hammock
    Hennessey Explorer Ultralight
    Tarp
    Hennessey Hex
    Insulation
    HH Super Shelter
    Suspension
    ring buckle
    Posts
    7,799
    Images
    101
    Personal opinion only -- I don't like the bulk of either the flat felled seam or the french seam in this application.

    If you have not cut the fabric yet then cut it with a hot knife to seal the edge. Or if the fabric is already cut sear the edge with a flame. Either way will seal the edge so it won't fray. The other option would be to seam the selvage edges on the interior.

    In any event if the fabric won't fray a simple single seam stitch line will do the trick.

    There is nothing wrong with the flat felled or the french seams but there are other options.
    I may be slow... But I sure am gimpy.

    "Bless you child, when you set out to thread a needle don't hold the thread still and fetch the needle up to it; hold the needle still and poke the thread at it; that's the way a woman most always does, but a man always does t'other way."
    Mrs. Loftus to Huck Finn

    We Don't Sew... We Make Gear! video series

    Important thread injector guidelines especially for Newbies

    Bobbin Tension - A Personal Viewpoint

Similar Threads

  1. How to remove old seam sealing for new seam sealing?
    By Hangar in forum Weather Protection
    Replies: 1
    Last Post: 09-28-2014, 15:15
  2. Felled Seam vs French Seam
    By 100milerunner in forum Do-It-Yourself (DIY)
    Replies: 26
    Last Post: 01-31-2013, 21:10
  3. what type of pad?
    By jakobpackers@hotmail.com in forum Pads
    Replies: 4
    Last Post: 05-30-2012, 10:52
  4. Has anyone ever used this type of bug net?
    By redrob in forum Suspension Systems, Ridgelines, & Bug Nets
    Replies: 4
    Last Post: 01-02-2012, 10:38
  5. Type of seam on DIY hammock footbox, shelf, zipper, etc
    By patermagnus in forum Do-It-Yourself (DIY)
    Replies: 3
    Last Post: 09-05-2011, 18:06

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •