Results 1 to 7 of 7

Thread: layering

  1. #1
    Senior Member
    Join Date
    Oct 2010
    Location
    tacoma wa.
    Posts
    305

    layering

    last month i bought a summer weight uq. and after examining it, i'm starting to think i under estimated the insulating power of the full length down. it's still chilly here(over night lows of around 40's range) and i'm chomping at the bit to get out and try my set up. so to bring up the rateing of the underside, i'm thinking that i might buy a 3/4 length ix. my question is, how to layer this combo? does the down lay closest to the sleeper, or the ix ? i have yet to buy a top quilt, and will probably buy a 3season one for that, since it can easyly be opened up for heat comtrol.

  2. #2
    Member jkloeker's Avatar
    Join Date
    Nov 2010
    Location
    NKY
    Hammock
    WBBB 1.0DL/Nano 7/Nite Owl
    Tarp
    Camo Superfly
    Insulation
    Phoenix/Burrow
    Suspension
    Whoopies/Trunks
    Posts
    52
    Images
    1
    I'm not 100% but I'm pretty sure the layers should be you, the hammock, the iq, and then the down. That way the ix isnt holding the moisture in the down.

  3. #3
    Herder of Cats OutandBack's Avatar
    Join Date
    Dec 2010
    Location
    Denver, CO
    Posts
    8,761
    Images
    129
    Quote Originally Posted by the_gr8t_waldo View Post
    last month i bought a summer weight uq. and after examining it, i'm starting to think i under estimated the insulating power of the full length down. it's still chilly here(over night lows of around 40's range) and i'm chomping at the bit to get out and try my set up. so to bring up the rateing of the underside, i'm thinking that i might buy a 3/4 length ix. my question is, how to layer this combo? does the down lay closest to the sleeper, or the ix ? i have yet to buy a top quilt, and will probably buy a 3season one for that, since it can easyly be opened up for heat comtrol.
    I would think a summer weight UQ should be good in the 40's but maybe not when you add humidity.

    IMO, the farther you are from the down the colder you will be. I would make sure your down UQ is right up against the bottom of the hammock and you.
    Adjust or modify your UQ suspension until it is.

    I would then add a breathable UQP to help the UQ hold the heat.

    With that said I'm no fan of non breathable materials under me do to condensation issues.

    my $0.02

    hth

  4. #4
    Senior Member MAD777's Avatar
    Join Date
    May 2009
    Location
    White Mountains, New Hampshire
    Hammock
    DIY, WBBB & Switchback
    Tarp
    HG cuben,OES Spinn
    Insulation
    DIY 3/4 UQ/TQ, UGQ
    Suspension
    Dynaglide / Dutch
    Posts
    10,950
    Images
    39
    You do not want a down quilt sandwiched between you and a non-breathable or poorly breathable layer. If you use an IX layer or space blanket, put it next to the hammock, then the down under quilt.
    Mike
    "Life is a Project!"

  5. #5
    Senior Member Knotty's Avatar
    Join Date
    Mar 2009
    Location
    Denville, NJ, USA
    Hammock
    DIY Stretch-Side
    Tarp
    DIY Cat Cut Hex
    Insulation
    Phoenix and Nest
    Suspension
    cinch buckles
    Posts
    4,377
    Images
    227
    Especially in humid areas I would recommend the IX between the hammock and UQ to avoid condensation in the UQ. Been there, done that.
    Knotty
    "Don't speak unless it improves the silence." -proverb
    DIY Gathered End Hammock
    DIY Stretch-Side Hammock
    Stretch-Side "Knotty Mod"
    DIY Bugnet

  6. #6
    Senior Member Bubba's Avatar
    Join Date
    May 2010
    Location
    SW Ontario, Canada
    Hammock
    WBBB 1.7 SL
    Tarp
    WB Superfly
    Insulation
    WB and UGQ
    Suspension
    Whoopies or Straps
    Posts
    7,184
    Images
    248
    From the reading I have done the IX would be best in between the UQ and the hammock to act as a vapour barrier. Ideally this should be done in really cold temps. IIRC for temps above the dew point of your area then the other way around is OK. I hope I'm remembering this correctly but try it and see what works for you.
    Don't let life get in the way of living.

  7. #7
    Senior Member
    Join Date
    Nov 2010
    Location
    Midwest
    Posts
    2,423
    "well... I'm with you fellas..."

    Seriously though, you don't want to trap moisture in your down.. really effects it's insulating properties.. make sure it can breathe and don't put a vapor barrier on the outside of it.

  • + New Posts
  • Similar Threads

    1. Layering system
      By Ghilliechef in forum Under Quilts
      Replies: 2
      Last Post: 02-03-2014, 23:45
    2. Layering UQs - IX & Down
      By jerseydave in forum Bottom Insulation
      Replies: 5
      Last Post: 09-13-2012, 22:02
    3. Layering Quilts?
      By Gary_R in forum Top Insulation
      Replies: 16
      Last Post: 11-01-2011, 16:36

    Tags for this Thread

    Bookmarks

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •