Several years ago I was volunteering with a scout troop who had "inherited" a bunch of junky tents. I built as many complete tents as I could from the bits and pieces but ended up with tons of leftover aluminum poles.
I've been dragging these things around trying to find a good use for them. Now that I've converted to hammocking and using toggles the lightbulb finally went on.
So, I've got a couple dozen pole sections in two sizes that seem to make some very nice toggles. The first is approximately 5/16" diameter and has a black anodized finish. The others are silver in color (not sure of a coating) and about 5/8" in diameter. Both seem to make nice toggles and so far I haven't had any failures.
Since this is basically free material and it only takes a few minutes to cut/polish the ends I can't justify trying to put these in the PIF. So here's what I can do. Shoot me a PM letting me know how many and what size/length you want. I'll send you my address and in return you'll mail me a self addressed stamped envelope.
Please be nice and don't ask for a dozen. I can only knock these out after my kids go to bed and I have a few minutes to myself. If you want a hole drilled for a tether please let me know the specifics (through one side or both).
I haven't tried to mail these yet but the small ones in the photo weigh just shy of 4 grams and the larger ones are 12g. I'm pretty sure a couple of pairs will go in an envelope and still be under 1 oz (first class mail).
I'll keep this running until I get tired of making them or run out of material. If someone just wants a few sections of the tubing to make their own it's basically the same setup. Let me know what you want and send me the shipping/materials and I'll drop it in the mail.