Results 1 to 7 of 7
  1. #1
    Oms's Avatar
    Join Date
    Mar 2007
    Location
    Chicago western suburbs
    Hammock
    DH RG 11' 1.6 Lefty
    Tarp
    HG, OES
    Insulation
    UQG,HG,WB
    Suspension
    Whoopies
    Posts
    1,340

    Seam sealing pull-outs

    When using my new cuben tarp in the rain the pull-outs weeped through. Before I seal them, would a mixture of mineral spirits and silicon cause any damage to the cuben? Has anyone else sealed them or is there a better way?

  2. #2
    Senior Member hangnout's Avatar
    Join Date
    Nov 2006
    Location
    Monterey, TN
    Hammock
    DIY Bridge
    Tarp
    DIY Tarps
    Insulation
    Leigh's UQ's
    Posts
    1,789
    Images
    123
    You can use the urethane based seam sealers with the cuben fabric. You will not have to thin them down. This is what I used and it has lasted since 2008 with my diy cuben tarp.

  3. #3
    Oms's Avatar
    Join Date
    Mar 2007
    Location
    Chicago western suburbs
    Hammock
    DH RG 11' 1.6 Lefty
    Tarp
    HG, OES
    Insulation
    UQG,HG,WB
    Suspension
    Whoopies
    Posts
    1,340
    Like Seamgrip or Silnet sold at REI?

  4. #4
    Senior Member hangnout's Avatar
    Join Date
    Nov 2006
    Location
    Monterey, TN
    Hammock
    DIY Bridge
    Tarp
    DIY Tarps
    Insulation
    Leigh's UQ's
    Posts
    1,789
    Images
    123
    Quote Originally Posted by Oms View Post
    Like Seamgrip or Silnet sold at REI?
    Seamgrip is urethane based

    Silnet is silicone based

    Some of the glues used on cuben like Hysol are urethane based.

    You don't have to thin down most of the urethane based sealers but you do have watch for runs. Most are water based so it is easy wipe off before drying.

  5. #5
    Oms's Avatar
    Join Date
    Mar 2007
    Location
    Chicago western suburbs
    Hammock
    DH RG 11' 1.6 Lefty
    Tarp
    HG, OES
    Insulation
    UQG,HG,WB
    Suspension
    Whoopies
    Posts
    1,340
    Quote Originally Posted by hangnout View Post
    Seamgrip is urethane based

    Silnet is silicone based

    Some of the glues used on cuben like Hysol are urethane based.

    You don't have to thin down most of the urethane based sealers but you do have watch for runs. Most are water based so it is easy wipe off before drying.
    Thanks, I will have to swing by REI and pick up a tube.

  6. #6
    Banned
    Join Date
    Jul 2008
    Location
    hershey, PA
    Hammock
    Warbonnet
    Tarp
    Zpacks Cuben
    Insulation
    Cottage Down
    Suspension
    webbing/buckle
    Posts
    1,190
    Images
    51
    do you own a hammockgear.com tarp? i was under the impression that there was no seam sealing required?

  7. #7
    stormcrow's Avatar
    Join Date
    Aug 2008
    Location
    Lancaster, OH
    Hammock
    DIY gathered end
    Tarp
    Hammock Gear Cuben
    Insulation
    100% Hammock Gear
    Suspension
    Whoopie Sling
    Posts
    1,519
    Images
    26
    Thanks for chiming in on this Hangnout. Those are great recommendations.

    The only real possible point of water infiltration on the cuben tarp is the 4 panel pull outs. I assume that is what OMS is referring to. We have recently started using a small amount of seam grip on the panel pull outs. The perimeter pullouts might also weep though but they are on the perimeter so we do not seal them. I suppose you could seam seal them though.

Similar Threads

  1. How to remove old seam sealing for new seam sealing?
    By Hangar in forum Weather Protection
    Replies: 1
    Last Post: 09-28-2014, 15:15
  2. sealing a seam
    By DeRozea in forum Weather Protection
    Replies: 7
    Last Post: 09-18-2013, 17:08
  3. Seam Sealing
    By Brian Miller in forum Clark Jungle Hammocks
    Replies: 2
    Last Post: 03-28-2013, 08:33
  4. Removing Excess Silicone from Panel Pull Seam Sealing?
    By xeren in forum Warbonnet Hammocks
    Replies: 3
    Last Post: 08-22-2011, 10:05
  5. Seam sealing
    By traftonm in forum General Hammock Talk
    Replies: 1
    Last Post: 05-24-2010, 18:02

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •