Page 2 of 2 FirstFirst 12
Results 11 to 16 of 16
  1. #11
    Senior Member Hooch's Avatar
    Join Date
    Mar 2007
    Princeton, NC
    Warbonnet Blackbird 1.7 DL
    Speer Winter Tarp
    Burrow & Crowsnest
    Quote Originally Posted by Knowledgeengine View Post
    Well for the time being I have made a zip line inside my apartment out of the 50 foot tubular webbing. I'll post some pictures before I take it down later, but I need to clean up first.

    I took the 50 foot and ran it between two structual columns and used a descending ring on the webbing to slide, and a baseball bat for the handle. It is a lot of fun, but it is too short of a zip line. Would be cool to have at a campsite, if I had a lightweight handle.

    In all seriousness though, I have done this to help remove some of the initial stretch in the fabric. As everyone has pointed out the nylon stretches, after a few runs down the line it sags, and I tighten it back up.
    Nice idea, but it probably won't work. And this is why: nylon webbing has a low memory stretch. This means that after you stretch it, it doesn't stay there, but goes back to its original size. So once you stretch this webbing it'll do the same. I had the ENO SlapStraps that were made from nylon. And every time I used them, they stretched and strecthed, eventually winding up with my butt on the ground. I appreciate your ingenuity, but in all likelihood it's not going to work. Learn your lesson the hard way if you must, like I did. But don't say we didn't offer alternatives to you. In short, we told you so!
    Last edited by Hooch; 05-11-2008 at 10:48.
    "If you play a Nicleback song backwards, you'll hear messages from the devil. Even worse, if you play it forward, you'll hear Nickleback." - Dave Grohl

  2. #12
    Senior Member stoikurt's Avatar
    Join Date
    Oct 2006
    Panama City, FL
    Custom 1.7/1.1 WB Blackbird
    JRB Nest & DIY RMS
    Whoopee Slings
    Quote Originally Posted by Bugzee Malone View Post
    Hooch is correct when he says that climber's ropes need to have stretch in them and are designed to do so.
    The stretch is a shock absorber.
    If you fell while climbing and your rope didn't stretch it would snap when suddenly put under load.
    Or snap you if it held.
    "Work to Live...Don't Live to Work!"

  3. #13
    Senior Member Ramblinrev's Avatar
    Join Date
    Apr 2008
    Milton, PA
    Hennessey Explorer Ultralight
    Hennessey Hex
    HH Super Shelter
    ring buckle
    "Whether the stone hit's the pitcher, or the pitcher hits the stone... It's going to be bad for the pitcher." Tevya... Fiddler on the Roof.
    I may be slow... But I sure am gimpy.

    "Bless you child, when you set out to thread a needle don't hold the thread still and fetch the needle up to it; hold the needle still and poke the thread at it; that's the way a woman most always does, but a man always does t'other way."
    Mrs. Loftus to Huck Finn

    We Don't Sew... We Make Gear! video series

    Important thread injector guidelines especially for Newbies

    Bobbin Tension - A Personal Viewpoint

  4. #14
    Senior Member 6 feet over's Avatar
    Join Date
    May 2007
    Clark / Claytor
    Neo 12 X 12
    Cheap pad
    I know it’s not good, but $17.50 is a relatively cheap lesson.

    This site is like a double edged sword: They often save you money by helping you avoid unsuitable items, but they also provoke you into buying things you never would have thought of!

    The harder I work, the luckier I get.

  5. #15
    Senior Member nickelanddime's Avatar
    Join Date
    Apr 2007
    DIY parallelogram/speer
    guidegear camo 12'
    garlington style
    These fellows are answering your question of how they would use your components to create a suitable suspension and I think it's very creative that one step in that process is bartering or selling off unsuited things to achieve the end goal... they just haven't told you the final steps.

    Personally as my final step in the process I'd go with 2000# polyester webbing (seatbelt or ratchet tie down, whatever) and two carabiners sewn into loops at the end, but that's just me

    and yeah, Hooch is right, it'll never stop stretching
    "nickels and dimes, yours and mine, did you cash in on your dreams? You don't dream for me no" Third Eye Blind

  6. #16
    the stock nylon webbing on your claytor is relativly short correct? you will notice much less stretch from it than you will from a 15 foot piece. the amount of stretch from a foot or so will be minimal, 15 feet on each end would add up to several feet of stretch which will be noticeable. you might as well replace the stock webbing too while you're at it though.

    also, why not replace the ridgeline with a non stretch line that will hold your sag angle? this will allow you to keep a consistent sag and hang lower on far apart trees if needed.

    i don't see prussics working on webbing but it's worth a try i guess. i have hung from autoblocks/klemheist (like a prussic but better) on line before and they held, but let several inches as they tighten and are hard to loosen once weighted. you don't want to tie knots? if you take the time to learn some decent knots you will find they are barely more time consuming than ring buckles or whatever. knots are better suited to tree straps and line though. if you are dead set on using only webbing, 2 cc buckles will be lighter than your 2 oval biners, and much easier to adjust. you would have to tie a knot or hitch to use the biners unless your prussic idea works.

    the 2000# camo polyester from is really nice too. what colors does the 1.5" strapworks poly come in?

Similar Threads

  1. Ridgerunner Suspension mod ideas
    By DRobertson in forum Warbonnet Hammocks
    Replies: 18
    Last Post: 06-22-2014, 07:02
  2. Ideas for a suspension system? Really New to this!
    By tmontgo1 in forum Suspension Systems, Ridgelines, & Bug Nets
    Replies: 11
    Last Post: 05-23-2011, 16:26
  3. New Chrysalis Suspension Ideas?
    By Danalex in forum Suspension Systems, Ridgelines, & Bug Nets
    Replies: 0
    Last Post: 04-22-2011, 08:29
  4. Need Suspension ideas (TMI)
    By Buffalo Skipper in forum Suspension Systems, Ridgelines, & Bug Nets
    Replies: 18
    Last Post: 09-22-2010, 23:58
  5. any ideas for a diy suspension?
    By woodsman in forum Do-It-Yourself (DIY)
    Replies: 6
    Last Post: 01-09-2010, 15:12

Tags for this Thread


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts