Results 1 to 8 of 8

Thread: Tarp Skins

  1. #1
    New Member
    Join Date
    Nov 2011
    Location
    S.E Kansas a stones throw from Big Brutus
    Hammock
    ENO DN
    Tarp
    BushCraft OF
    Insulation
    Pending
    Suspension
    Whoopies
    Posts
    36

    Tarp Skins

    I plan on making a set of tarp skins and was wondering if the tapered tube is more for diamond and hex tarps? I have a square tarp I am making them for, and my thought is the rolled up tarp will be the same size tube it's whole length. Am I wrong in this thinking?
    Thanks, Dale

  2. #2
    Fronkey's Avatar
    Join Date
    Dec 2010
    Location
    Grass Valley, Ca
    Hammock
    DIY "The Crippler"
    Tarp
    "Cuben Refugee"
    Insulation
    DIY "The Ex-gf"
    Suspension
    Whoopie Slings
    Posts
    5,419
    It's tapered because it holds the tarp better and prevents it from slipping. Also, a lot of people tend to bunch it up more in the middle rather than the ends.

    Fronkey

  3. #3
    Bubba's Avatar
    Join Date
    May 2010
    Location
    Ontario, Canada
    Hammock
    WBBB 1.7 SL
    Tarp
    WB Superfly
    Insulation
    WB and UGQ
    Suspension
    Whoopies or Straps
    Posts
    6,450
    Images
    80
    To add to what Fronkey said, I find it easier to roll the corners inward and up towards the middle which creates the taper. This also makes sliding them on and off easier.
    Don't let life get in the way of living.

  4. #4
    Moderator raiffnuke's Avatar
    Join Date
    May 2011
    Location
    Pittsfield, MA
    Hammock
    WBBB,WBRR,DIY,WBBB Clone,ENO,GTUL
    Tarp
    HG WP,WB Superfly
    Insulation
    Hammock Gear
    Suspension
    Whoopies&DutchGear
    Posts
    5,538
    Images
    44
    All of the above is true...but for me, I prefer to use a python skin (one large snake skin). It keeps me from getting the giant bubble of air in the middle of my tarp when I used two snake skins, and i find it slightly easier to use. YMMV.

  5. #5
    hangNyak's Avatar
    Join Date
    Jun 2011
    Location
    St. Petersburg, FL
    Hammock
    DIY
    Tarp
    Superfly
    Insulation
    HG down/DIY
    Suspension
    Dynaglide whoopies
    Posts
    784
    Images
    18
    Quote Originally Posted by raiffnuke View Post
    All of the above is true...but for me, I prefer to use a python skin (one large snake skin). It keeps me from getting the giant bubble of air in the middle of my tarp when I used two snake skins, and i find it slightly easier to use. YMMV.
    x2 I made one out of camo netting. Works great, as the air is forced out one end. No bunching up in the middle. The dimensions of the netting I started with was 9 inches wide x 12 ft. long. Sewed a hem on each end,, then folded in half long ways and sewed. Turn the whole thing inside out and your done.
    RON

    A tree's a tree. How many more do you need to look at? ~ Ronald Reagan

  6. #6
    Senior Member millarky's Avatar
    Join Date
    Aug 2009
    Location
    Ohio
    Hammock
    Switchback 1.1 dbl
    Tarp
    AHE prototype hex
    Insulation
    Leighlo hi and low
    Suspension
    strap/ring buckle
    Posts
    475
    Quote Originally Posted by hangNyak View Post
    x2 I made one out of camo netting. Works great, as the air is forced out one end. No bunching up in the middle. The dimensions of the netting I started with was 9 inches wide x 12 ft. long. Sewed a hem on each end,, then folded in half long ways and sewed. Turn the whole thing inside out and your done.
    Yep, that is my method as well. Easy peasy to sew up.
    The gene pool needs a life guard.

  7. #7

    Join Date
    Apr 2011
    Location
    alabama
    Hammock
    HH Expedition, DIY
    Tarp
    Maccat Deluxe
    Insulation
    DIY TQ, UQ
    Suspension
    Whoopies
    Posts
    271
    Images
    53
    I made one long tube out of tulle, with pockets one the end. That way if its damp I can hang to on the outside of the my pack, if dry put it inside.
    "truth is uncontainable, and inexpressible. It neither is nor is not.
    This unformulated principle is the foundation of the different systems of all the sages."
    Diamond Sutra

  8. #8
    New Member
    Join Date
    Nov 2011
    Location
    Pensacola, FL
    Hammock
    BIAS Camper
    Tarp
    Kelty Noah's Tarp
    Insulation
    Jarbridge UQ
    Suspension
    whoopie w/ toggles
    Posts
    44
    Quote Originally Posted by hangNyak View Post
    x2 I made one out of camo netting. Works great, as the air is forced out one end. No bunching up in the middle. The dimensions of the netting I started with was 9 inches wide x 12 ft. long. Sewed a hem on each end,, then folded in half long ways and sewed. Turn the whole thing inside out and your done.
    How big of a tarp do you have? I am considering making a python skin for my Kelty Noah 12x12 and want to make sure it would fit with these dimensions...

Similar Threads

  1. Snake Skins/Tarp Skins by Wilderness Logics
    By Acer in forum Wilderness Logics
    Replies: 5
    Last Post: 07-06-2013, 12:28
  2. Tarp Skins....Now what?
    By default in forum Weather Protection
    Replies: 10
    Last Post: 11-11-2012, 16:29
  3. Tarp Skins
    By garyg763 in forum Weather Protection
    Replies: 4
    Last Post: 10-19-2012, 19:53
  4. Tarp Skins
    By streamline in forum [SOLD/WITHDRAWN] Items no longer available
    Replies: 12
    Last Post: 04-12-2012, 20:40
  5. WTB: Tarp and Skins
    By sinthome in forum Want to Buy
    Replies: 3
    Last Post: 04-01-2012, 11:20

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •