Results 1 to 3 of 3

Thread: 4 layer IX UQ

Hybrid View

  1. #1
    Senior Member jnelson871's Avatar
    Join Date
    Feb 2012
    SF Bay Area
    Darien UL
    Zpacks Asym
    WB Yeti
    Dynaglide Whoopies

    4 layer IX UQ

    Anyone make one of these with 4 layers instead of 3? I am thinking I could make one of these and convince my friend to try it if I can get the rating down to 25* or so. I am looking at using the pattern with 1.1 only on the bottom and using a fourth layer of IX that is 42" wide. Would this work?

    Solution!!!! Sleep in a TREE

  2. #2
    Senior Member Lost_Biker's Avatar
    Join Date
    Jan 2011
    DIY Digi Camo DL
    Maxi Tarp
    Underquilts Lewis
    Rings and Straps
    My 3 layer IX works for me down to the low 30's (max), so you could get to 25 ok. I also used a 1.1 rip stop on the bottom only. People tolerate cold differently, so ymmv.
    In order to really be effective, I had to make a top cover to help trap body heat inside the hammock - that was worth 5-10 degrees by itself and worked wonderfully. Just remember that IX is a vapor barrier and can lead to condensation problems. I had just a little condensation in mine but it dried very quickly.
    The forth layer at 42" should work ok.
    Last edited by Lost_Biker; 03-04-2012 at 08:07. Reason: Added stuff
    I got in a fight one time with a really big guy, and he said, "I'm going to mop the floor with your face." I said, "You'll be sorry." He said, "Oh, yeah? Why?" I said, "Well, you won't be able to get into the corners very well."

  3. #3
    G...Hawk's Avatar
    Join Date
    Aug 2009
    Glendale, NY/ NYC
    WBBB.coyote WBBB.olive
    WB Edge+SuperFly
    webbing, whoOpies
    IX quilts :

    IXUQ - ripstop+sewn in IX layer (darted and sewn at head+foot end) channels 4 sides on ripstop;
    extra 10"IX on each long side, folded+stitched (60"wide IX; made 40"wide UQ, therefore extra 20" made into 10" sides, folded+sewn at outside edge of UQ's 40"; inside edge of IX left to flap and trap any warm air )

    UQ insert- floating layer IX, with tabs, that can be hung inside UQ for colder seasons, 30s to high 20s.

    Or hung by tabs inside summer UQ of only ripstop with channels 4sides = ripstop+1 layerIX.

    IX UQ combo - 1 or 2 layers ripstop+2 and 1/2 layers IX.

    Deep winter hanging into the teens or lower : IXcombo between down Speer's SnugFit and hammock; the single ripstop layer also becomes an under layer protection of the down Speer's SnugFit, protection from rain or ground or pine sap.

    In deep summer put IX floating layer inside layers on WBBB.

    The ripstop only layer makes a good wind shield over part of the bugnet, in warm weather, if tarp is not needed.
    ( Love to see the moonlight and stars.)

    IXTQ - triangular footbox; ripstop+two IX layers sewn in, with 8"ripstop blanketedge near face, third IX layer removable / unbuttoned.

    This is the only TQ down into the teens. With down booties and clothes as necessary.

    I like that IX gear can be taken apart to suit the seasons. Besides no concern about wet gear.


    Last edited by G...Hawk; 03-04-2012 at 17:28.
    trailname : Distracted By Stone

Similar Threads

  1. Not another single layer vs double layer hammock thread!
    By lionsroar in forum Warbonnet Hammocks
    Replies: 14
    Last Post: 09-09-2014, 19:24
  2. Questions about single layer vrs double layer.
    By Phrek in forum Do-It-Yourself (DIY)
    Replies: 16
    Last Post: 07-20-2014, 13:46
  3. Sewing another layer to single layer hammock
    By Hegone in forum Suspension Systems, Ridgelines, & Bug Nets
    Replies: 5
    Last Post: 02-23-2013, 12:22
  4. Single Layer Vs Double Layer Hammock
    By macinnisl in forum General Hammock Talk
    Replies: 20
    Last Post: 12-18-2012, 10:35
  5. Replies: 5
    Last Post: 04-05-2009, 14:04


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts