Page 1 of 3 123 LastLast
Results 1 to 10 of 21
  1. #1
    New Member
    Join Date
    Jun 2008
    Location
    The Bluegrass
    Hammock
    JRB Bear Mountain Bridge
    Tarp
    JRB 11x10 Cat Tarp
    Posts
    34

    Question Ridge line for JRB Bridge

    I recently received my bridge hammock and would like to set a ridge line so that I might hang some of my gear off of the ground (I hate the idea of bugs/water infiltrating), but I'm not sure at all what I'm doing. It's not structural, and I'm not looking to hang any more than what's outside of my pack at night (cookset, boots, water, etc).

    I was thinking of simply running some line in between the metal rings (the top of the triangle), but I since I am brand spankin' new to hammocking, I'm afraid that I'll upset the cosmos and break something (namely my backside). I'll be using a JRB 11x10 tarp, so, theoretically, the line, nor anything on it, should be exposed to the elements.

    1) Is this an okay method?
    2) What kind of cord might I use? I have read that 550 para cord, although strong enough, has too much stretch to be used effectively (as in I would run a good chance of having my gear all over me by morn).
    3) Is this line, if tied reasonably taut, under so much stress that a 100 pound string of spectra cord would snap? I'll only be attaching ~20 pounds of gear (if that much).
    4) Is this a line that I can/should leave attached? Or will I want to retie it every time (perhaps with the use of biners or something).
    5) If I do use biners to attach a ridge line, will they have to be load bearing biners? Or will a generic biner work fine?

    Many thanks in advance.

  2. #2
    Senior Member FanaticFringer's Avatar
    Join Date
    Oct 2006
    Location
    Lawrenceville, Ga
    Hammock
    JRB Bear Mtn. Bridge
    Tarp
    BlackCat/JRB 11x10
    Insulation
    Pad(s)/JRB Quilts
    Posts
    2,417
    Images
    34
    Quote Originally Posted by clwilla View Post
    I recently received my bridge hammock and would like to set a ridge line so that I might hang some of my gear off of the ground (I hate the idea of bugs/water infiltrating), but I'm not sure at all what I'm doing. It's not structural, and I'm not looking to hang any more than what's outside of my pack at night (cookset, boots, water, etc).

    I was thinking of simply running some line in between the metal rings (the top of the triangle), but I since I am brand spankin' new to hammocking, I'm afraid that I'll upset the cosmos and break something (namely my backside). I'll be using a JRB 11x10 tarp, so, theoretically, the line, nor anything on it, should be exposed to the elements.

    1) Is this an okay method?
    2) What kind of cord might I use? I have read that 550 para cord, although strong enough, has too much stretch to be used effectively (as in I would run a good chance of having my gear all over me by morn).
    3) Is this line, if tied reasonably taut, under so much stress that a 100 pound string of spectra cord would snap? I'll only be attaching ~20 pounds of gear (if that much).
    4) Is this a line that I can/should leave attached? Or will I want to retie it every time (perhaps with the use of biners or something).
    5) If I do use biners to attach a ridge line, will they have to be load bearing biners? Or will a generic biner work fine?

    Many thanks in advance.

    1)I'd make it a structural ridgeline instead. That's what I did with mine. You'r gear will be fine underneath the hammock covered up or attached to a tree covered up. Do a search here about "how do you hang your gear" etc.........I attach mine between the rings and it is 9.5' long. The length the Jacks recommend the rings to be apart.
    2)I use Amsteel 7/64 rope. Liltle overkill in strength but works for me.
    http://www.westmarine.com/webapp/wcs...&ci_sku=147584
    3)............
    4)I leave mine attached.
    5) generic should work well.
    "Every day above ground is a good day"

  3. #3
    Senior Member GrizzlyAdams's Avatar
    Join Date
    Apr 2007
    Location
    Illinois
    Hammock
    GrizzBridge Ariel
    Tarp
    HG Cuben Winter
    Insulation
    DIY UQ
    Posts
    4,777
    Images
    564
    Quote Originally Posted by clwilla View Post
    I recently received my bridge hammock and would like to set a ridge line so that I might hang some of my gear off of the ground (I hate the idea of bugs/water infiltrating), but I'm not sure at all what I'm doing. It's not structural, and I'm not looking to hang any more than what's outside of my pack at night (cookset, boots, water, etc).

    I was thinking of simply running some line in between the metal rings (the top of the triangle), but I since I am brand spankin' new to hammocking, I'm afraid that I'll upset the cosmos and break something (namely my backside). I'll be using a JRB 11x10 tarp, so, theoretically, the line, nor anything on it, should be exposed to the elements.

    1) Is this an okay method?
    2) What kind of cord might I use? I have read that 550 para cord, although strong enough, has too much stretch to be used effectively (as in I would run a good chance of having my gear all over me by morn).
    3) Is this line, if tied reasonably taut, under so much stress that a 100 pound string of spectra cord would snap? I'll only be attaching ~20 pounds of gear (if that much).
    4) Is this a line that I can/should leave attached? Or will I want to retie it every time (perhaps with the use of biners or something).
    5) If I do use biners to attach a ridge line, will they have to be load bearing biners? Or will a generic biner work fine?

    Many thanks in advance.
    There is really no risk to the cord if you don't make the ridgeline structural. Whether it is or isn't depends simply on how taut it is. Tautness means it is carrying tension which means that it is structural.

    A line that goes from ring to ring and is straight (but not stiffly taut) when the hammock is empty will droop a little when you get into it. I've found it handy to use a fixed ridgeline as a way of finding what the right height and tension ought to be on the suspension lines, by adjusting them so that the ridgeline is just as I described, straight but not under much tension.

    I typically use lightweight spectra for the ridgeline, good to 100 or 150 lbs. Way more than enough for this kind of use (but may not be if the ridgeline takes up a lot of tension). Paracord could stretch, but if all the load it is carrying is your spare socks and a cook pan, who cares?

    So you can leave the ridgeline on (which could affect packing up a little), or put a cheap non-load bearing biner on one end. If you take it off, then you can adjust the length to be straight but not taut when you hang after you've hung the hammock.

    Just keep the tension off that ridgeline, and it becomes a clothesline.

    But there is nothing wrong with a structural ridgeline, used properly. Use high test cord like FF suggests. If you make it removeable use a weight-rated biner. I saw ones rated to 150 lbs in Home Depot tonight, about $1. That should suffice.


    Grizz

  4. #4
    Senior Member BillyBob58's Avatar
    Join Date
    Jan 2007
    Location
    Tupelo, MS
    Posts
    11,108
    Images
    489
    A RL is fine regardless, but what about using the spreader bars for hanging stuff off of each end, to keep stuff off the ground? Isn't it designed for that use?

    Quote Originally Posted by clwilla View Post
    I recently received my bridge hammock and would like to set a ridge line so that I might hang some of my gear off of the ground (I hate the idea of bugs/water infiltrating), but I'm not sure at all what I'm doing. It's not structural, and I'm not looking to hang any more than what's outside of my pack at night (cookset, boots, water, etc).

    I was thinking of simply running some line in between the metal rings (the top of the triangle), but I since I am brand spankin' new to hammocking, I'm afraid that I'll upset the cosmos and break something (namely my backside). I'll be using a JRB 11x10 tarp, so, theoretically, the line, nor anything on it, should be exposed to the elements.

    1) Is this an okay method?
    2) What kind of cord might I use? I have read that 550 para cord, although strong enough, has too much stretch to be used effectively (as in I would run a good chance of having my gear all over me by morn).
    3) Is this line, if tied reasonably taut, under so much stress that a 100 pound string of spectra cord would snap? I'll only be attaching ~20 pounds of gear (if that much).
    4) Is this a line that I can/should leave attached? Or will I want to retie it every time (perhaps with the use of biners or something).
    5) If I do use biners to attach a ridge line, will they have to be load bearing biners? Or will a generic biner work fine?

    Many thanks in advance.

  5. #5
    Senior Member angrysparrow's Avatar
    Join Date
    Apr 2007
    Location
    near Memphis, TN
    Hammock
    WB Traveler
    Tarp
    ZPacks CF
    Insulation
    Te-Wa / HG / WB
    Suspension
    Whoopie Hooks
    Posts
    9,646
    Images
    92
    Quote Originally Posted by BillyBob58 View Post
    ...but what about using the spreader bars for hanging stuff off of each end, to keep stuff off the ground? Isn't it designed for that use?
    I concur. In the following image from JRB's site(two, actually) it shows hanging both pack and gear from the spreader bars. I never got around to trying that when I had my BMBH, but on the trail it seems ideal. The pictured use does assume that you have a tarp with ample coverage on the ends to prevent rain from blowing in.

    “I think that when the lies are all told and forgot the truth will be there yet. It dont move about from place to place and it dont change from time to time. You cant corrupt it any more than you can salt salt.” - Cormac McCarthy

  6. #6
    New Member
    Join Date
    Jun 2008
    Location
    The Bluegrass
    Hammock
    JRB Bear Mountain Bridge
    Tarp
    JRB 11x10 Cat Tarp
    Posts
    34
    Quote Originally Posted by BillyBob58 View Post
    A RL is fine regardless, but what about using the spreader bars for hanging stuff off of each end, to keep stuff off the ground? Isn't it designed for that use?
    I'm under the impression that any significant lateral force on the spreader bars is a really bad idea because of the compression force on them when lying in the hammock (I.e., they can bend - at least the warning not to put any weight on them while lying in the hammock which comes with the hammock says so). Although, someone with some actual experience, rather than my theorization based off of my poor understanding physics, might know better.

  7. #7
    Senior Member angrysparrow's Avatar
    Join Date
    Apr 2007
    Location
    near Memphis, TN
    Hammock
    WB Traveler
    Tarp
    ZPacks CF
    Insulation
    Te-Wa / HG / WB
    Suspension
    Whoopie Hooks
    Posts
    9,646
    Images
    92
    Quote Originally Posted by clwilla View Post
    I'm under the impression that any significant lateral force on the spreader bars is a really bad idea because of the compression force on them when lying in the hammock...
    Perhaps 'significant lateral force' means approaching the rated limit, rather than typical use?

    “I think that when the lies are all told and forgot the truth will be there yet. It dont move about from place to place and it dont change from time to time. You cant corrupt it any more than you can salt salt.” - Cormac McCarthy

  8. #8
    New Member
    Join Date
    Jun 2008
    Location
    The Bluegrass
    Hammock
    JRB Bear Mountain Bridge
    Tarp
    JRB 11x10 Cat Tarp
    Posts
    34
    Quote Originally Posted by angrysparrow View Post
    I concur. In the following image from JRB's site(two, actually) it shows hanging both pack and gear from the spreader bars. I never got around to trying that when I had my BMBH, but on the trail it seems ideal. The pictured use does assume that you have a tarp with ample coverage on the ends to prevent rain from blowing in.


    It appears that the first picture, the one with the gear hammock, doesn't actually have anything attached to the bars themselves, but the rings to which the bars attach. The 2nd pic, however, most definitely shows the pack hanging off of the spreader bars. Thanks. I've poured over the JRB site multiple times over the last week or so; I can't believe that I didn't see that myself. I'd likely simply hang the pack from the ring which holds the suspension to the tree with a biner rather than

    I'm still interested in the [I]idea[I] of hanging gear from a ridge line. It just seems so much more convenient to get at oft used night items (water, light, etc) thank having to dig through a pack. I suppose a hefty set of trial and error is in my near future.

    Thanks.

  9. #9
    Senior Member angrysparrow's Avatar
    Join Date
    Apr 2007
    Location
    near Memphis, TN
    Hammock
    WB Traveler
    Tarp
    ZPacks CF
    Insulation
    Te-Wa / HG / WB
    Suspension
    Whoopie Hooks
    Posts
    9,646
    Images
    92
    Quote Originally Posted by clwilla View Post
    I suppose a hefty set of trial and error is in my near future.
    Oh darn. More hammock time.
    “I think that when the lies are all told and forgot the truth will be there yet. It dont move about from place to place and it dont change from time to time. You cant corrupt it any more than you can salt salt.” - Cormac McCarthy

  10. #10
    Senior Member headchange4u's Avatar
    Join Date
    Oct 2006
    Location
    Kentucky
    Hammock
    Dual Layer WB Blackbird
    Tarp
    OES Cuben
    Insulation
    SnugFit
    Posts
    6,249
    Images
    35
    I did put a ridge line on my BMB for the reasons Grizz stated, to give me some sort of guide line for setting up the hammock.
    “Light thinks it travels faster than anything but it is wrong. No matter how fast light travels, it finds the darkness has always got there first, and is waiting for it." -Terry Pratchett



    Premium Quality, Fresh Roasted Coffee
    www.meancatcoffee.com

  • + New Posts
  • Page 1 of 3 123 LastLast

    Similar Threads

    1. Whoopie Slings Single Line Ridge Line, Snake Skins, SP 700 Ti Lid
      By tjayblues in forum [SOLD/WITHDRAWN] Items no longer available
      Replies: 2
      Last Post: 03-13-2014, 22:01
    2. Full length ridge line vs. tying out from ridge line tie outs
      By Buenos in forum OES Tarps (no longer in business)
      Replies: 36
      Last Post: 03-20-2013, 19:41
    3. Double Ridge line vs. Single Ridge line
      By ninjahamockman in forum Whoopie Slings
      Replies: 17
      Last Post: 08-13-2012, 10:47
    4. Whoopie Sling Single Line Tarp Ridge Line Question
      By Wogs in forum Suspension Systems, Ridgelines, & Bug Nets
      Replies: 5
      Last Post: 06-18-2011, 09:15
    5. Opie's Single Line Tarp Ridge Line
      By Moxie in forum Suspension Systems, Ridgelines, & Bug Nets
      Replies: 2
      Last Post: 09-29-2010, 10:57

    Tags for this Thread

    Bookmarks

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •