Results 1 to 7 of 7
  1. #1
    in it for the naps oldgringo's Avatar
    Join Date
    Aug 2009
    Location
    Checotah, Oklahoma
    Hammock
    Varies
    Tarp
    GargoyleGear Ogee
    Insulation
    UQ-varies w/season
    Suspension
    onrope buckle
    Posts
    6,271

    No Tree/One Tree Hang w/Bipod(s)

    As per Cakes' request, here are pics of my bipods. They are connected by a fixed length (12') continuous ridgeline, and guyed out by single ratchet straps on each end. Inclining the bipods away from the hammock transfers the load from the guylines/stakes to the legs of the pods. In a similar vein, longer straps will result in a more horizontal load on the stakes, and they will hold better.



    Here is a detail of the top of one bipod. Each leg is ~6.5' long, and is made from 1.5" tubing left over from building a greenhouse. 2x4s would work just as well. Visible is a Prusik loop and marlinspike for attaching a tarp.



    There is such a thing as eye nuts, but they are hard to find, and breathtakingly expensive. I made these with links of chain. The eyebolts are 3/8", and I welded the eyes closed.

    Dave

    http://www.uark.edu/misc/xtimber/rna/pattonsbluff.html

    It has always been my private conviction that any man who pits his intelligence against a fish and loses has it coming.
    John Steinbeck

  2. #2
    Senior Member Walking Bear's Avatar
    Join Date
    Mar 2007
    Location
    Fairbury NE
    Hammock
    DIY Bridge
    Tarp
    DIY 11x10
    Insulation
    DIY UQ & down bag
    Posts
    856
    Looks good. It looks like you used one inch ratchet straps. Do you have any problem with them stretching when loaded?
    Knowledge is knowing a tomato is a fruit. Wisdom is not putting it in a fruit salad.

  3. #3
    in it for the naps oldgringo's Avatar
    Join Date
    Aug 2009
    Location
    Checotah, Oklahoma
    Hammock
    Varies
    Tarp
    GargoyleGear Ogee
    Insulation
    UQ-varies w/season
    Suspension
    onrope buckle
    Posts
    6,271
    Quote Originally Posted by Walking Bear View Post
    Looks good. It looks like you used one inch ratchet straps. Do you have any problem with them stretching when loaded?
    No, it's the same stuff I use for my hammock suspensions.
    Dave

    http://www.uark.edu/misc/xtimber/rna/pattonsbluff.html

    It has always been my private conviction that any man who pits his intelligence against a fish and loses has it coming.
    John Steinbeck

  4. #4
    Dave that is ultra slick, would fit right in a trailer, again, you make it simple. jim

  5. #5
    Senior Member MedicineMan's Avatar
    Join Date
    Dec 2006
    Location
    Roan Mountain,TN
    Hammock
    Traveler with HNO AirShip
    Tarp
    HNO AirShip
    Insulation
    Leiglo 5/50
    Suspension
    Everything Dutch
    Posts
    5,659
    Images
    76
    Oldgringo, I missed what the straps are going to ground with? I'm thinking big auger screws like to hold down trailers?

  6. #6
    in it for the naps oldgringo's Avatar
    Join Date
    Aug 2009
    Location
    Checotah, Oklahoma
    Hammock
    Varies
    Tarp
    GargoyleGear Ogee
    Insulation
    UQ-varies w/season
    Suspension
    onrope buckle
    Posts
    6,271
    Quote Originally Posted by MedicineMan View Post
    Oldgringo, I missed what the straps are going to ground with? I'm thinking big auger screws like to hold down trailers?
    That would work. I'm using 24"x3/8" rebar pins.
    Dave

    http://www.uark.edu/misc/xtimber/rna/pattonsbluff.html

    It has always been my private conviction that any man who pits his intelligence against a fish and loses has it coming.
    John Steinbeck

  7. #7
    Acer's Avatar
    Join Date
    Jul 2011
    Location
    Southern Indiana Wooded Hills
    Hammock
    WBRR, Diy M90 MR Gathered
    Tarp
    WL Tadpole
    Insulation
    Lynx/UGQ/Jarbidge
    Suspension
    Straps/Whoop/Dutch
    Posts
    3,887
    Images
    19
    I cobbed a few tent stakes for 4 wheel driving in Colorado when you don't have trees to winch to,,,they are about 2.5 ft long and half inch steel..some are 3' and almost immovable when you drive them in the ground with a sledge hammer..they would work as well if you ever run across them. All tent companies have them. just a thought.

Similar Threads

  1. Tree strap extensions vs. long tree straps.
    By Gqgeek81 in forum Suspension Systems, Ridgelines, & Bug Nets
    Replies: 1
    Last Post: 08-17-2014, 12:45
  2. Rant on: second time forgetting tree straps on tree :/
    By jay_nj in forum General Hammock Talk
    Replies: 24
    Last Post: 06-11-2013, 13:05
  3. FS: Tree to Tree Trail Gear Light Hiker
    By ^shane^ in forum [SOLD/WITHDRAWN] Items no longer available
    Replies: 4
    Last Post: 02-27-2013, 13:10
  4. Tree to Tree Trail Gear no longer offering MMG
    By MacEntyre in forum Molly Mac Gear
    Replies: 0
    Last Post: 11-04-2012, 06:24
  5. Advice on One Tree Bipod idea
    By taylo in forum Do-It-Yourself (DIY)
    Replies: 12
    Last Post: 11-14-2011, 18:35

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •