Your sewing is most excellent, and I'm sure your carpentry will be great too.
Mule tape will work on that leg splaying too
I have my wood and poles, but haven't gone any further, as I didn't have the amsteel to finish things up. I don't know why I didn't think about the mule tape? How do you do mule tape prussiks though...and where are the prussiks needed? I'm a bit confused about that.....unless it's just the actual loop and not a working prusik, like a half hitch, then I get it....maybe
Reply to njredneck
If your stand is unstable make sure that the lines holding the top rail are centered under the tripod legs. I have the narrow footprint version and have slept about 19 nights in it now and I move around quite a lot getting settled and it has stayed stable after the first night once I got the hanging lines centered.
I actually made 4 of them: 2 are larksheaded to the hammock end and then looped over the top rail. Pics tomorrow... I'm off to Trick-or-Treat!
I made mine !
It's far to be perfect but it does the job !
First try yesterday.
Originally Posted by olddog
The question was posed by old4hats about the number of turtledog stands that had been built. Went back and reviewed a few threads, the Turtlelady stand, the TurtleDog stand and a thread by domromer. Here is what I was able to find and assume that there may be others.
#101 - turtleburger
#102 - JakobW
#103 - berksound
#104 - HangDenAround
#105 - civetta62
#106 - LEAGLE
#107 - joeybravo13
#108 - JohnSawyer(soon)
#109 - JaxHiker
#110 - delphyves, the first from France!
Most of us end up poorer here but richer for being here. Olddog, Fulltime hammocker, 365 nights a year.
After finding this thread which gave me the perfect solution for my lack of trees in my backyard I went out and bought all the wood and bits I needed to whip up my 'mk1' tripods.
I then had an issue finding the tubing to run between the tripods... I couldn't find anything like what I have seen in the photos here.
After some online research I found a guy who specialised in aluminium tubing, so i went to his workshop and this is where the concept for the 'mk2' tripods was born!
I have ended up building telescopic aluminium tripods that stand approx. 2 metres tall (1.2 metres when compact) and an aluminium centre beam (scaffolding) that is strong enough to hang body weight from the centre. The reasoning behind going this thick was to avoid the beam from bowing and so if someone pulled themselves out of the hammock using the beam it wouldn't collapse above them.
I have slept in my WBBB hanging from the mk2 and it is perfect and strong. I have also made the centre beam almost 4 metres long so I can hang my WB Mamajamba tarp from it too.
Last edited by Rightside; 11-06-2012 at 04:40. Reason: Added Photo
Very nice and heavy duty. Well done!
tato has one, and i make ready to assemble kits, without wood of course
Glory to the Fallen, Honor to the Lost. Faith to the Missing. Carry on Forever.