Results 1 to 3 of 3
  1. #1
    Senior Member
    Join Date
    Aug 2009
    Location
    Nova Scotia, Canada
    Hammock
    HH Xped w/2QZQ#4 and HH ULBA
    Tarp
    HH Hex
    Insulation
    HG Phoenx|7DBurrow
    Suspension
    Whoopie Slings/DCs
    Posts
    177

    splicing 7/64 vs 1/8 amsteeel?

    i made my first set of whoopies out of 1/8 amsteel but i'm going to make a new set from 7/64.

    is 7/64 an 8-strand or 12-strand braid? if 8, i'm wondering if the taper will differ for 7/64?

    for 1/8 it's...mark 2...skip 2...mark 2...skip 2...mark 2

    if 7/64 is 8 strand, would you only...mark 2...skip 2...mark 2?
    Bring a GPS...It's awkward when you have to eat your buddies.

    My YouTube Channel

  2. #2
    Mouseskowitz's Avatar
    Join Date
    Mar 2012
    Location
    Stevens Point, WI
    Hammock
    DIY 1.5 DBL or 1.4 PolyD
    Tarp
    one of my DIYs
    Insulation
    DIY down or PL
    Suspension
    Something Ti
    Posts
    1,440
    7/64 is 8 strand. It's mark 2, skip 4, mark 2 as seen in this Sampson diagram, look at step 2.

  3. #3
    Senior Member nacra533's Avatar
    Join Date
    May 2009
    Location
    Hartwell, GA
    Hammock
    DIY dbl 1.1
    Tarp
    DIY hex
    Insulation
    DIY 3 season tq+uq
    Suspension
    webbing, again
    Posts
    585
    Images
    26
    [Technically speaking, the strand difference makes a difference....

    In a "real" splice, the taper is an integral part of the splice. In a locked Brummell, the locked part the splice is weakened by the "locking" and the taper is much less important than with a true buried splice. A taper is still absolutely required.

    For a locked Brummell, I typically, cut a couple strands about 1.5" from end (eyeballed) , then 1" from end, then 1/2 " from end. Then I fan out the bottom inch and cut it on an angle..

    This is not the proper way, but a lockd Brummell, is not taking advantage of the full strength of the line, but for hammock usage, it is more than adequate.

    In reality, you could skip the bury all together and have similar strength. I use this method to create pigtails for boats and other things. Sailors call it an "Aussie" splice. Obviously, it's not full strength.

    Very similar to this
    http://www.hammockforums.net/gallery...earchid=160007

Similar Threads

  1. Splicing Tool
    By kc_joe in forum Do-It-Yourself (DIY)
    Replies: 31
    Last Post: 10-23-2014, 11:09
  2. Splicing
    By Maytag in forum General Hammock Talk
    Replies: 7
    Last Post: 05-15-2014, 15:53
  3. Splicing - What do you use?
    By FrActOwL in forum Do-It-Yourself (DIY)
    Replies: 23
    Last Post: 09-12-2013, 21:33
  4. DIY Splicing
    By cdiephol in forum Do-It-Yourself (DIY)
    Replies: 19
    Last Post: 04-12-2012, 08:19
  5. First go at splicing amsteel
    By Roe Ring in forum Suspension Systems, Ridgelines, & Bug Nets
    Replies: 16
    Last Post: 04-05-2012, 23:49

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •