Results 1 to 6 of 6
  1. #1
    New Member saucybagles's Avatar
    Join Date
    Jan 2012
    Location
    Cleveland, OH
    Hammock
    ENO single nest
    Tarp
    OES maccat
    Insulation
    Nerves of steel
    Suspension
    Whoopies
    Posts
    34

    Where to put ridge line and whoopies?

    Right then just a quick question about my set up
    My cameras Jank right now so let's see if the text adventure makes any sence! Right now I have the stock set up but I swapped the stock beiners with light weight ones but my question is if I got whoopies could I put the fixed loop on to the Beiner rather than the Chanel of the hammock? And is there anyreason not to put an ASR onto the Carabiner and not into the haick Chanel?
    "let us dare to read, think, speak and write"- john adams

  2. #2
    MrClean417's Avatar
    Join Date
    Dec 2010
    Location
    Somewhere near Parkville, MO
    Hammock
    DIY Knotty/Speer special, RED
    Tarp
    Warbonnet Superfly
    Insulation
    50 extree pounds
    Suspension
    Whoopy slings
    Posts
    1,440
    You can hook to a biner BUT the reason to go to a Whoopie sling is to save weight. For that reason you hook the Whoopie straight to the hammock and the ridgeline over that so that load goes from the Whoopie to the ridgeline to the other Whoopie so it can do it's job. An extra biner on both ends is just extra gear and thus weight.

    But do what you want to do, hang your own hang.
    From Somewhere near Parkville, Mo
    William Crane
    aka MrClean
    Everything you need to know about Hammocks in vids and reading:
    Hammock in 3 minutes D. Hansen - It really is this easy to make a hammock
    Shug's Hammock Newbies videos - Takes you buy the hand and shows you in video
    The Ultimate Hang D. Hansen - now read about everything
    JustJeff's Hammock tutorial - more reference
    TableclothFactoryBlanks - shorter lengths available on sidebar
    The TurtleDog Stand thread - Hang anywhere.

  3. #3
    Bob Bobson's Avatar
    Join Date
    Feb 2012
    Location
    Savannah, GA
    Hammock
    WBBB 1.1dbl/Eno DBL
    Tarp
    Eno Dryfly
    Insulation
    Jarbridge+20burrow
    Suspension
    Cinch buckle+Dutch
    Posts
    97
    I did the jacks r better setup: continuous loops, Dutch biners to whoopies that are larks headed to my tree straps and attached via Dutch clips. Sounds cumbersome, but it has some practical advantages. First, biners are a great rain break in the suspension. Second, you can easily switch out to another suspension via continuous loops and biners (e.g. Webbing). Finally, biners offer perfect attachment points for ASR. My two cents. Good luck and have fun!

  4. #4
    New Member saucybagles's Avatar
    Join Date
    Jan 2012
    Location
    Cleveland, OH
    Hammock
    ENO single nest
    Tarp
    OES maccat
    Insulation
    Nerves of steel
    Suspension
    Whoopies
    Posts
    34
    thanks guys like bob said above the reason for doing this config is the ability to swap out other suspensions and i feel it worth the extra oz thanks guys!
    "let us dare to read, think, speak and write"- john adams

  5. #5
    New Member DynoMike's Avatar
    Join Date
    Jun 2012
    Location
    Kansas
    Hammock
    ENO Doublenest
    Insulation
    Sleeping bag
    Suspension
    whoopies
    Posts
    16
    I removed my factory rope and biners. Ran slings through channels then through ridge line, then through its self. Fixed loop of course. Adjustable to the outside ends. And I can still fit all of it plus 2 six foot poly huggers in factory pouch. And it weighs less also! Love the set up. I went with whoopieslings.com.

  6. #6
    Senior Member iRokk's Avatar
    Join Date
    May 2012
    Location
    Alta Loma, California
    Hammock
    The Quagmire/misc DIY/Eno DN
    Tarp
    WB SF
    Insulation
    Hg system(eventual
    Suspension
    DIY whoopies/UCR's
    Posts
    777
    Images
    4
    I replaced the factory rope with a couple DIY Amsteel continuous loops and the factory biners with a couple C.A.M.P. Nano's. For my ridgeline, I made a whoopie adjustable from 82"-112". I tend to like having it around 96" to sleep flat. My loop, ridgeline, and whoopies connect at my biners. I like having the biners because, like saucybagles said, it makes swapping stuff out much easier, and for a fraction of weight anyways. I've included a picture of my setup.
    I may be dumb, but at least I'm ugly!

    I've done so much, with so little, for so long, now I can do anything with nothing.

    It's not peer pressure, it's just your turn.

Similar Threads

  1. Whoopie Slings Single Line Ridge Line, Snake Skins, SP 700 Ti Lid
    By tjayblues in forum [SOLD/WITHDRAWN] Items no longer available
    Replies: 2
    Last Post: 03-13-2014, 23:01
  2. Replies: 36
    Last Post: 03-20-2013, 20:41
  3. WTT my whoopies for your adjustable ridge line
    By gunsfan05 in forum [SOLD/WITHDRAWN] Items no longer available
    Replies: 3
    Last Post: 12-14-2012, 08:45
  4. Double Ridge line vs. Single Ridge line
    By ninjahamockman in forum Whoopie Slings
    Replies: 17
    Last Post: 08-13-2012, 11:47
  5. Whoopie Sling Single Line Tarp Ridge Line Question
    By Wogs in forum Suspension Systems, Ridgelines, & Bug Nets
    Replies: 5
    Last Post: 06-18-2011, 10:15

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •