Setup with Stingerz

[rrmorriss]

Thought I would share a few pictures of my tarp setup with the Dutchware Stingerz. I had a little trouble getting an idea of size/scale before I got them and thought this might help those wondering. So far they work great.

I tied a loop to the eye ring on the Stinger, went around the tree, around the hook, then just wrapped the line around the antennas. They have a good bite to them and just wrapping it held up to some light rain. I would probably tie it off overnight though.

Total weight with WB Edge tarp + stuff sack and all lines: 10.9 oz.

[Ewker]

looks good. I will either be using that or the dutch hooks this weekend. Not sure which tarp has what on it

[dejoha]

Very nice set-up -- looks a lot like my own! Whoopie hooks and Stingerz. Great photos too. Thanks for sharing!

[Buffalo Skipper]

Thanks for the pics. The sense of scale is sometimes missing. I am considering a similar setup.

Is that 2.2mm Zing-it you are using there?

[ShadowAlpha]

nice setup
+1 on those photos

[rrmorriss]

It's 1.75mm. I assume it's Zing-it, though I'm not sure. I got it from Warbonnet with the tarp.

[tryker13]

Can't go wrong with Dutchware!

[Eagle Eye]

Like a Tarp Flyz, a Stingerz is setup to comfortably accept 1.75 mm Zing-it or Lash-it. We just sent out a pait of stingerz with the small hole spliced onto 1.75 zing-it with a small locked brummel and the other end of the line finished with another locked brummel. I will be taking photos of all custom Dutchware in the future to post here, sad i missed this one.

[rrmorriss]

I like the idea of a locked brummel on the Stinger end, but what would the brummel on the other end be used for?

[Acer]

You don't have to tie them off,,dutch's stuff holds,,try it,,no knots needed on the stingerz.