Hey guys I have an ENO DN and I have already put whoopies on it now my next step is a ridge line how do I install an adjustable ridge line
Hey guys I have an ENO DN and I have already put whoopies on it now my next step is a ridge line how do I install an adjustable ridge line
This should help......http://www.tothewoods.net/HomemadeHammock4.html
Shug
Whooooo Buddy)))) All Secure in Sector Seven
- Loki my videos
"Climb the mountains and get their good tidings.
Nature's peace will flow into you as sunshine flows into trees.
The winds will blow their own freshness into you, and the storms their energy,
while cares will drop away from you like the leaves of Autumn." — John Muir
I take the eye end of the ridge line and run a loop around one of the whoopies. You can either loop the other/adjustable end over the other whoopie or use a chain link or ridge line biner from Dutch. Have that set up on my BIAS. This rig is not the BIAS, only looped at each end.
Love is blind. Marriage is an eye opener.
I have mine looped inside of the whoopie. Basically, after you run the whoopie through the sewn channel on the hammock, but before you pull it back through the loop, slide the ridgeline on. Then secure the whoopie sling by pulling it through the loop. A picture might help, so let me get one.
--edit--
Here's a picture of mine:
I had to work to get it pulled apart to really show how it's attached. Once you lay in the hammock it is pulled really tight and securely on there.
Last edited by Texico; 12-12-2012 at 21:47.
I have mine larksheaded on the non moving end to the whoopie... And the other you could just run inside the whoopie or just over the whoopie, and the angle will hold the ridgeline in place...
Live, Laugh, Love, if that doesn't work. Load, Aim and Fire, repeat as necessary...
Buy, Try, Learn, Repeat
ok thanks alot guys that really helps
Bookmarks