Page 1 of 3 123 LastLast
Results 1 to 10 of 25
  1. #1
    Senior Member jokerr's Avatar
    Join Date
    Feb 2012
    Location
    lake st louis mo
    Hammock
    WBRR
    Tarp
    Superfly
    Insulation
    winter lynx
    Posts
    106

    Amsteel or Webbing failing

    Has anyone had either webbing or amsteel actually break?

    I don't mean slipping or poor setups but total failure of the material.
    I know both are very strong and amsteel is much stronger than it looks
    but with thousands of hangers using them I have not seen a post about
    either one just snapping apart.

  2. #2
    Senior Member Brute1100's Avatar
    Join Date
    May 2012
    Location
    South Texas
    Hammock
    WWM or tablecloth
    Tarp
    SuperFly
    Insulation
    shamu 40*
    Suspension
    UCR whoopie
    Posts
    2,511
    Images
    1
    Interesting question... Tagged for responses...
    Live, Laugh, Love, if that doesn't work. Load, Aim and Fire, repeat as necessary...

    Buy, Try, Learn, Repeat

  3. #3

    Join Date
    Jan 2011
    Location
    South Central IN
    Hammock
    WBRR, Lots of DIY
    Tarp
    MacCat; Cloudburst
    Insulation
    Lynx, HG T/UQ, AHE
    Suspension
    Varies
    Posts
    8,025
    I believe I've seen a few posts about webbing failures due to not paying attention to wear/fraying, hardware used wrong or insufficient stitching of an end loop.

    I have a vague recollection of a hanger being awoken by knife applied to suspension by fellow campers.

  4. #4
    Senior Member dejoha's Avatar
    Join Date
    Jun 2009
    Location
    Flagstaff, AZ
    Hammock
    Most
    Tarp
    GoLite Poncho Tarp
    Insulation
    Phoenix, Burrow
    Suspension
    Whoopie Hook
    Posts
    2,227
    Images
    207
    I've had a set of DIY straps fail due to weak thread. I was using polyester thread but it was a spool for clothing. Once I realized my mistake, I switched to my gutterman thread and havn't had a problem.

    I've been using some amsteel now that is a few years old and it is still going strong. I recommend always inspecting your gear prior to any hang to check for damage and fraying. Replace at any sign of wear that makes you uncomfortable. Err with caution. Never hang any higher than you are willing to fall.

  5. #5
    Senior Member DemostiX's Avatar
    Join Date
    Jan 2011
    Location
    Like Lewis & Clark: Wintrin' o/t Columbia again: PDX
    Hammock
    Clark w 2QZQ mod,Tropical, NX;Nano
    Tarp
    Clark micro
    Insulation
    Major down
    Suspension
    7/64 SK75 +strap
    Posts
    2,337
    Images
    13

    Don't trust Guetermann

    because it is Guetermann. It is just another thread company making a range of threads, some appropriate, and others not --(including a full range of embroidery threads.) Still, with enough stitches of thread heavy enough not to be abraded and frayed or decomposed to the core by UV, strap-loops and channels can be sewn securely even with the wrong thread.

    That said, if you bought Guetermann from a an outdoor specialist, it is likely the right thread in the Guetermann lineup.

    On Amsteel breakage. Yes, it has been reported here, in structural ridge-lines (SRL), How? Well, start with 450lb bs material. then degrade it by tying knots in it instead of splicing, and the bs may be just 300lb. Now put a transient or "dynamic" load on it, and a cord explicitly designed to have no stretch and no energy absorbing capacity will snap.

    Who to blame? Not the designer and fabricator, who expects the SRL to be no tighter than making it easy to make a horizontal Z in, between thumb and forefinger, which may be just 7% of the effective breaking strength.
    Last edited by DemostiX; 12-31-2012 at 02:23.

  6. #6
    MAD777's Avatar
    Join Date
    May 2009
    Location
    South Florida
    Hammock
    DIY, WBBB & Switchback
    Tarp
    HG cuben,OES Spinn
    Insulation
    DIY down 3/4 UQ/TQ
    Suspension
    Dynaglide & Dutch
    Posts
    10,359
    Images
    39
    I've read a few tales of straps breaking. I've replaced a set of straps that looked a bit frayed.

    I look at hammock suspensions like brakes on a car. It's just something that needs to be replaced periodically.
    Mike
    "Life is a Project!"

  7. #7

    Join Date
    Jan 2011
    Location
    South Central IN
    Hammock
    WBRR, Lots of DIY
    Tarp
    MacCat; Cloudburst
    Insulation
    Lynx, HG T/UQ, AHE
    Suspension
    Varies
    Posts
    8,025
    Quote Originally Posted by DemostiX View Post
    ...On Amsteel breakage. Yes, it has been reported here, in structural ridge-lines (SRL), How? Well, start with 450lb bs material...
    I suspect you're thinking of a material other than the Amsteel Blue we use. The smallest diameter has an average breaking strength of 1600 lb.

  8. #8
    Senior Member Risk's Avatar
    Join Date
    Nov 2006
    Location
    Beavercreek, OH
    Hammock
    DIY 4x9 1.1 oz ripstop (5.3 oz)
    Tarp
    ZPack Cuben Hex
    Insulation
    DIY TQ, DIY 3/4 UQ
    Suspension
    DG UCRs, Mule Tape
    Posts
    230
    Images
    15
    I can't remember anyone having failure of hammock strap or line material, even when we were using yellow polypro and tying knots in it. I think the rated strength of that braid was < 500 pounds.

    Knots have failed, splices have failed, thread has failed. Hammock material has failed.

    I have had yellow polypro break with other uses - but only when it was left outdoors in the sun for long periods - greater than a year. UV degrades many of the materials.
    Rick (Risk) Website: http://www.imrisk.com
    I cook. I sew. I walk. I lead. I hang. I write. I play.
    Author of "A Wildly Successful 200-Mile Hike"
    http://www.amazon.com/Wildly-Success.../dp/B00COCI5HW

  9. #9
    Senior Member dejoha's Avatar
    Join Date
    Jun 2009
    Location
    Flagstaff, AZ
    Hammock
    Most
    Tarp
    GoLite Poncho Tarp
    Insulation
    Phoenix, Burrow
    Suspension
    Whoopie Hook
    Posts
    2,227
    Images
    207
    Demostix has a good point about thread. I didn't mean to plug one brand. What I should have said was to use a stronger thread. The gutterman brand that is sold by many DIY guys comes in different weights for different projects.

  10. #10
    Senior Member ibgary's Avatar
    Join Date
    Aug 2012
    Location
    Colorado
    Hammock
    Dangerbird, (custom) thanks Papa
    Tarp
    10x10 DIY
    Insulation
    DIY insultex.
    Suspension
    Woopie, UCR
    Posts
    506
    I started a 7/64 amsteel test last night. It loops over a 90* steel edge and supports the hammock. Hammock swing = movement. If it can take the abrasion on a 90* angle then I won't worry about my small diameter nickel plated rings. They r ~ 3/16".

Similar Threads

  1. SALE!!! Amsteel, ARGON, and webbing
    By Dutch in forum Dutchware
    Replies: 16
    Last Post: 11-19-2013, 21:51
  2. Amsteel AND Webbing?
    By Meat Hunter in forum Suspension Systems, Ridgelines, & Bug Nets
    Replies: 2
    Last Post: 05-29-2012, 19:34
  3. directional stress on webbing and amsteel?
    By stevebo in forum Suspension Systems, Ridgelines, & Bug Nets
    Replies: 3
    Last Post: 01-19-2012, 19:57
  4. Amsteel to webbing question?
    By finskie in forum Do-It-Yourself (DIY)
    Replies: 9
    Last Post: 07-22-2011, 15:09
  5. Webbing and amsteel rigging question.
    By eflat7 in forum Suspension Systems, Ridgelines, & Bug Nets
    Replies: 2
    Last Post: 02-08-2010, 13:58

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •