Some more great info, thanks!
Some more great info, thanks!
Wow.... Thank you Hc4U , 1Adam 12 and Wilson especially but really everyone who's contributing to this thread. Couple questions...
1Adam12 do you have dimensions/pattern for yours? Also, what fold pattern/method did you use?
I saw Wilson mention that the head and foot ends were folded differently but never found a pattern or mention of what the difference was. Can anyone point me to a link if I just missed it?
Last edited by wideguy; 04-01-2013 at 10:34.
(Looking for others to see how their setup works locally)
The dimensions I used were the same as HeadChange4U recommended in his initial post. I pretty much followed his directions except for the tie outs. The tie outs I tried to copy from a friend of our's Hennessy Hammock.1Adam12 do you have dimensions/pattern for yours? Also, what fold pattern/method did you use?
I made a cheap prototype from $1 yard material from Walmart to practice before I purchased all the materials for the final ones.
I followed the fold pattern that Headchange4U used in his initial post. I tried different ways to fold it and also tried it gathered like the warbonnet is, but we ended up going back to folding 5 times inward toward the center on each side and then we whipped the end with paracord. There is a good video on Youtube about whipping the ends on a search for DIY Quick & Easy Camping Hammock
What I like about doing this ourselves is that we can take it apart and try different methods to see how comfortable it is. We ended up going back to the original fold method that Headchange4U recommended. Thanks for letting us know you liked it. It is definitely rewarding to make something you can use.
Thanks Scott. The cost like anything will really depend on what you want to put into it. The initial prototype I made using "undetermined fabric content" material from Wal-Mart and taking a zipper out a sleeping bag I wasn't going to use anymore probably cost me $20. Our final cost for everything we made was close to $300. But we have two complete sets of Hammock with bug netting, JCPenney puffer jacket TQ & UQ, Hex Tarps, snakeskins, whoopie slings, tree huggers and compression bags to put it all in. I ordered most of our supplies from DIY Gear and they were great. I would highly recommend them. They also have DIY tutorials on there. A friend of mine with a Warbonnet BlackBird (which is super nice) paid much more than that for just one set of all listed above.
Instead of Velcro, how about sewing little square pockets and enclosing rare earth magnets on one side and say dimes on the other side?
It will add weight but possibly more durable.
Nice writeup! Quite helpful!
How did you get your zipper to come fully off? I can't seem to find anywhere that will sell zippers long enough that have the end part that dis-attaches. Any ideas would be great thanks as I am wanting one that the netting can come off fully.