Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1
    Senior Member stevebo's Avatar
    Join Date
    May 2009
    Location
    Moreland Georgia
    Hammock
    WBRR
    Tarp
    diy sil argon camo
    Insulation
    lynx
    Suspension
    whoopie slings
    Posts
    1,710

    rr suspension mod?

    Just wondering if anyone has tried this...............what if you took off the straps, the cinch buckles etc, and your ridge runner was down to just the hammock and the dog bones, and then you took a whoopie sling--do a larks head thru the ends of the dog bones----and use the traditional straps, marlin spike /toggle set up? Any problems with that? What would be the advantages? What would be the disadvantages? Just kicking an idea around!
    FYI: If you want to know what type a certain bear is, sneak up behind it and kick it. Then,
    run like crazy and climb up a tree. If the bear climbs the tree and eats you, it's a black
    bear. If the bear just pushes the tree over and eats you, it's a grizzly bear : )


    Do not walk behind me, for I may not lead. Do not walk ahead of me, for I may not follow. Do not walk beside me, either, just leave me alone.
    --unknown

  2. #2
    Senior Member ferret's Avatar
    Join Date
    Feb 2011
    Location
    Virginia
    Hammock
    WBRR
    Tarp
    HG camo cuben
    Insulation
    Down
    Suspension
    Dutch
    Posts
    415
    Thats pretty much what I'm doing except I'm using a dutch biner between the whoopie and the dogbones so I can separate them easily. I think your method should work just as well.

  3. #3
    Senior Member breyman's Avatar
    Join Date
    Aug 2012
    Location
    Denver, CO
    Hammock
    WBRR, WBBB XLC
    Tarp
    Superfly
    Insulation
    Variety of Quilts
    Suspension
    Whoopie/Dutch Hook
    Posts
    1,955
    Very doable. Main disadvantage is that it would make he minimum hang distance a bit further than it already is due to the whoopies.
    Brian
    Denver, CO
    Father. Husband. Scoutmaster.

  4. #4
    Senior Member stevebo's Avatar
    Join Date
    May 2009
    Location
    Moreland Georgia
    Hammock
    WBRR
    Tarp
    diy sil argon camo
    Insulation
    lynx
    Suspension
    whoopie slings
    Posts
    1,710
    Thanks guys! I wasnt sure if the larkshead would put too much stress on the dog bone end since there isnt anything inbetween them (no ring or biner etc)
    FYI: If you want to know what type a certain bear is, sneak up behind it and kick it. Then,
    run like crazy and climb up a tree. If the bear climbs the tree and eats you, it's a black
    bear. If the bear just pushes the tree over and eats you, it's a grizzly bear : )


    Do not walk behind me, for I may not lead. Do not walk ahead of me, for I may not follow. Do not walk beside me, either, just leave me alone.
    --unknown

  5. #5
    Timberrr's Avatar
    Join Date
    Jan 2011
    Location
    Orlando (okay, nearrr Orlando)
    Hammock
    WBRR
    Tarp
    The H.U.T.
    Insulation
    UGQ TQ and UQ
    Suspension
    The H.U.T.
    Posts
    1,379
    Images
    13
    I'd be concerned that as you are adjusting your whoopie you are 'sawwing' your dogbone where they touch. Check frequently for abrasion and excess wear.
    FHV Planning Thread (it's gonna rock!)
    https://www.hammockforums.net/forum/...ida-Hang-(FHV)

    So many trees, so little time...

  6. #6
    Country Roads's Avatar
    Join Date
    Mar 2011
    Location
    North Central West Virginia
    Hammock
    WB Blackbird 1.1 single/MBM UL
    Tarp
    z-packs cuben
    Insulation
    3S Phoenix UQ
    Suspension
    UCR's & straps
    Posts
    654
    Images
    26
    I have also removed all of the stock hardware. I currently am using a biner from my Whoopie slide to the dog bones. I am considering using a soft shackle in place of the biner; not that much lighter, but a little bit.
    I like to put up my tree straps/whoopies first, then hang my hammock and this makes it easy.

  7. #7
    hairbear's Avatar
    Join Date
    Sep 2012
    Location
    n e missouri
    Hammock
    wbrr/d i y speer
    Tarp
    hg 4sccc 12 foot
    Insulation
    lynx/w/logics
    Suspension
    straps /pole mod
    Posts
    988
    Im working on setting up a henessy bridge custom. On the foot end the triangle is made of two ucr' with a diamond knot on the tree hugger end. Im going from the huggers to the ucr with a 2 continuous loops. A lashing knot will hold the loop on the diamond knot.
    So far it seems to be a nice set up. Griz uses this set up,his video taught me. Seems to me the tree could be used as a foot end spreader bar.

  8. #8
    Quote Originally Posted by stevebo View Post
    Just wondering if anyone has tried this...............what if you took off the straps, the cinch buckles etc, and your ridge runner was down to just the hammock and the dog bones, and then you took a whoopie sling--do a larks head thru the ends of the dog bones----and use the traditional straps, marlin spike /toggle set up? Any problems with that? What would be the advantages? What would be the disadvantages? Just kicking an idea around!
    i considered doing this as well, even though it's generally considered a no-no simply because dyneema is so abrasion resistent, but decided against it. if anybody does this i'd urge you to take the connection apart occasionally and closely inspect the contact points to ensure they aren't wearing out the amsteel.

  9. #9
    Senior Member linuxhack's Avatar
    Join Date
    Oct 2008
    Location
    New Albany, IN
    Hammock
    WB RidgeRunner
    Tarp
    Mamajamba
    Insulation
    NeoAir LT / DIY UQ
    Suspension
    WB webbing
    Posts
    172
    Images
    29
    I plan to do something similar only replacing the whoopie with a length of amsteel line attached to a tree hugger. The dogbone on the hammock then just loops over a marlin-spike hitch in the amsteel. Haven't tried it yet, but don't see why it wouldn't work.

    Like this thread only replace the toggle with a MSH.
    http://www.hammockforums.net/forum/s...ad.php?t=67295

  10. #10
    Acer's Avatar
    Join Date
    Jul 2011
    Location
    Southern Indiana Wooded Hills
    Hammock
    WBRR, Diy M90 MR Gathered
    Tarp
    WL Tadpole
    Insulation
    Lynx/UGQ/Jarbidge
    Suspension
    Straps/Whoop/Dutch
    Posts
    3,887
    Images
    19
    As I modified the BMBH UL and cut everything off it and did a Professor Hammock total modifcation to the UL bridge hammock, I can see no purpose other than modifying the suspension triangle to the RR. Any body got any pics of their modifications as I find the RR to perfect to modify for a few ozs of savings in the weight catagorie. You have me a loss as to what your modifying.

Similar Threads

  1. WTB/WTT: 2 sets of Warbonnet Suspension/Cinch Buckle suspension
    By Poedog in forum Want to Buy
    Replies: 0
    Last Post: 06-06-2014, 19:49
  2. Tarp suspension rubbing against hammock suspension
    By nu2hike in forum Weather Protection
    Replies: 10
    Last Post: 10-12-2013, 11:01
  3. TRIANGLE SUSPENSION...a noobs flavor of suspension.
    By Noob in forum Suspension Systems, Ridgelines, & Bug Nets
    Replies: 31
    Last Post: 04-08-2013, 14:56
  4. New hammock suspension, tarps and tarp suspension.
    By tammons in forum Do-It-Yourself (DIY)
    Replies: 8
    Last Post: 02-08-2013, 12:36
  5. Yet Another Suspension System--the Alpine Butterfly Suspension (ABS)
    By GrizzlyAdams in forum Suspension Systems, Ridgelines, & Bug Nets
    Replies: 6
    Last Post: 07-02-2008, 19:43

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •