Page 1 of 4 123 ... LastLast
Results 1 to 10 of 40

Hybrid View

  1. #1
    Mouseskowitz's Avatar
    Join Date
    Mar 2012
    Location
    Stevens Point, WI
    Hammock
    DIY 1.5 DBL or 1.4 PolyD
    Tarp
    one of my DIYs
    Insulation
    DIY down or PL
    Suspension
    Something Ti
    Posts
    1,445

    Exclamation Why knots are not recommended in Amsteel or similar lines

    I've seen and been involved in many discussions in the time I've been on the forum about Amsteel. In many of them the idea of knots comes up. The general consensus is that it's not a good idea but I wasn't seeing any hard data.

    Today I was looking for something else and found this paper published by the Oregon Occupational Safety and Heath Administration. On page 17 (p22 of PDF) there is a table showing destructive testing data of several different knots. The numbers are worse than I ever recall anyone speculating. The worst knot tested was an improved (tucked) half blood knot which broke at 20% of catalog minimum. The best was a cow hitch (Lark's Head) which retained and average of 58%.

    The take away point for me is that the average of their testing showed that Amsteel only retains and average of 32% catalog minimum breaking strength when knots are involved.

    Ultimately everyone has to hang their own hammock. I just don't want to see anyone get hurt because they lack knowledge of the limitations of the equipment they are working with.
    Last edited by Mouseskowitz; 04-27-2013 at 15:27. Reason: updated terminology

  2. #2
    New Member
    Join Date
    Apr 2013
    Location
    Missouri
    Hammock
    DIY DBL 1.1
    Tarp
    DIY 1.1 Sil
    Insulation
    DIY PLUQ
    Suspension
    Whoopies
    Posts
    31
    Is there a different name for a lark's head knot?

    I tried to read through, as that is what I would like to use, but I didn't see it mentioned. However, I am kind of new to knot terminology, so I could very well just no know what to look for.

  3. #3
    QiWiz's Avatar
    Join Date
    Apr 2012
    Location
    NE Ohio
    Hammock
    BIAS WW
    Tarp
    ZPacks w doors
    Insulation
    HG; JRB; IX
    Suspension
    Whoopi, toggle
    Posts
    424
    Quote Originally Posted by firecat8 View Post
    Is there a different name for a lark's head knot?

    I tried to read through, as that is what I would like to use, but I didn't see it mentioned. However, I am kind of new to knot terminology, so I could very well just no know what to look for.
    another name is a ring hitch; there may be more
    Find the LIGHT STUFF at QiWiz.net

    The lightest cathole trowels, wood burning stoves, windscreens, spatulas,
    cooking options, titanium and aluminum pots, and buck saws on the planet

  4. #4
    Mouseskowitz's Avatar
    Join Date
    Mar 2012
    Location
    Stevens Point, WI
    Hammock
    DIY 1.5 DBL or 1.4 PolyD
    Tarp
    one of my DIYs
    Insulation
    DIY down or PL
    Suspension
    Something Ti
    Posts
    1,445
    It looks like a lark's head and cow hitch are the same thing. I'll edit and clarify that.

  5. #5
    pgibson's Avatar
    Join Date
    Apr 2009
    Location
    SW Idaho
    Hammock
    Black Bird 1.1 Dbl
    Tarp
    AHE Shangi La
    Insulation
    KAQ Prototype
    Suspension
    AHE Whoopie Slings
    Posts
    5,431
    Larks head, Cow hitch and girth hitch are all three basically the same knot other than how they are formed...you achieve the same finished looking product but get there slightly different for each one. End result and strength will be the same though.
    Arrowhead Equipment -- For all your hanging, backpacking and Ultralight Fishing gear needs.
    Arrowhead-Equipment.com Tenkara-Fishing.com Visit AHE on Facebook Follow us on Twitter Sign Up for Arrowhead-Equipment Gear News: Click Here

  6. #6
    MAD777's Avatar
    Join Date
    May 2009
    Location
    South Florida
    Hammock
    DIY, WBBB & Switchback
    Tarp
    HG cuben,OES Spinn
    Insulation
    DIY down 3/4 UQ/TQ
    Suspension
    Dynaglide & Dutch
    Posts
    10,491
    Images
    39
    Very informative post!
    Mike
    "Life is a Project!"

  7. #7
    Mouseskowitz's Avatar
    Join Date
    Mar 2012
    Location
    Stevens Point, WI
    Hammock
    DIY 1.5 DBL or 1.4 PolyD
    Tarp
    one of my DIYs
    Insulation
    DIY down or PL
    Suspension
    Something Ti
    Posts
    1,445
    I'm glad others find this as interesting as I do.

  8. #8
    Senior Member d-p's Avatar
    Join Date
    Mar 2008
    Location
    Indiana
    Hammock
    dp gear .com
    Tarp
    dp gear .com
    Insulation
    dp gear .com
    Suspension
    dp gear .com
    Posts
    195

    Best Knots?

    dplightweightbackpackinggear.com

  9. #9
    Member
    Join Date
    Jun 2012
    Location
    Lynchburg, VA
    Hammock
    Yukon Outfitters
    Tarp
    Chinook Sand 12x9
    Insulation
    UQ conversion & TQ
    Suspension
    Whoopie Slings
    Posts
    95
    I had some extra amsteel left over from some loops I made and just quickly tied the ends together to test some new straps. I managed to sit in the hammock for about 10 minutes until it came undone and the weak point was where the knot was in the amsteel. One bruised elbow & ego later, I was getting up off the ground and making a mental note to not do that again!

  10. #10
    Member
    Join Date
    Apr 2013
    Location
    Chattanooga, TN
    Posts
    85
    Quote Originally Posted by rottenpossum View Post
    I had some extra amsteel left over from some loops I made and just quickly tied the ends together to test some new straps. I managed to sit in the hammock for about 10 minutes until it came undone and the weak point was where the knot was in the amsteel. One bruised elbow & ego later, I was getting up off the ground and making a mental note to not do that again!
    So did the cord break, or did the knot slip?

    In regards to slipping - I had been using a bowline w/ some 7/64 Amsteel on part of my turtlelady-style hammock stand, but it would tend to slip sometimes. So I learned how to tie a Zeppelin Bend & haven't had a problem since. Also using the Zeppelin Bend on my ridgeline at the moment.

Similar Threads

  1. knots for dyneema tarp lines?
    By slicktop in forum Weather Protection
    Replies: 10
    Last Post: 04-27-2014, 20:29
  2. Question on Amsteel and knots
    By krshome in forum Suspension Systems, Ridgelines, & Bug Nets
    Replies: 4
    Last Post: 02-16-2013, 18:45
  3. Amsteel and knots, what's the deal?
    By egroeg555 in forum Suspension Systems, Ridgelines, & Bug Nets
    Replies: 11
    Last Post: 04-21-2011, 07:25
  4. No knots in Amsteel!
    By Knotty in forum Suspension Systems, Ridgelines, & Bug Nets
    Replies: 41
    Last Post: 12-11-2009, 20:14
  5. Amsteel, Dyneema and knots
    By pedro in forum General Hammock Talk
    Replies: 10
    Last Post: 11-15-2009, 13:46

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •