Page 4 of 4 FirstFirst ... 234
Results 31 to 32 of 32

Thread: Hammock ripping

  1. #31
    Join Date
    Sep 2011
    Richmond Va
    DIY WL Snipe
    WL Old Man Winter
    HG20* Inc., MH Bag
    The channel on the ends only has to be big enough for the cord. I just eyeballed it.

    Through the channels I used some bulky 3mm nylon cord from REI that I had lying around.

    If anything, your pitch might be a little too steep. The rule of thumb seems to be 30-35 degrees and you are looking closer to 45 degrees. Those anchor points are very close together. This might be part of the reason you feel a bit cocooned, but some shoulder squeeze and cocooning is normal. At the steep pitch you currently have a Ridgeline won't do a thing for you, but as your anchor points get father apart I think a Ridgeline is a must. It just makes setup so much easier and longer spans more usable.

    I also use ripstop from Joanne's and, Hancocks. Maybe you got a bad few yards? I've got the equivalent of a few months in one of my DIY hammocks with no signs of stress.

  2. #32
    Senior Member Ramblinrev's Avatar
    Join Date
    Apr 2008
    Milton, PA
    Hennessey Explorer Ultralight
    Hennessey Hex
    HH Super Shelter
    ring buckle
    There would be no function difference between taffeta and ripstop. Many commercial builders use taffeta which is, IMO a superior fabric for a hammock unless you are a gram weenie. Ripstop, as mentioned above, was designed for clothing, not weight bearing. The ripstop grid is not really a major benefit in hammocks.
    I may be slow... But I sure am gimpy.

    "Bless you child, when you set out to thread a needle don't hold the thread still and fetch the needle up to it; hold the needle still and poke the thread at it; that's the way a woman most always does, but a man always does t'other way."
    Mrs. Loftus to Huck Finn

    We Don't Sew... We Make Gear! video series

    Important thread injector guidelines especially for Newbies

    Bobbin Tension - A Personal Viewpoint

Similar Threads

  1. Help! Hammock keeps ripping from the spreader bar. :-(
    By sgrid in forum Introduce Yourself
    Replies: 1
    Last Post: 04-15-2013, 06:53
  2. WB 1.7 Dbl Ripping Seam
    By WebsterJ in forum Warbonnet Hammocks
    Replies: 12
    Last Post: 02-09-2012, 22:03
  3. DIY Hammock End Channels Design Ripstop Ripping
    By JBizzle in forum Do-It-Yourself (DIY)
    Replies: 13
    Last Post: 11-23-2011, 08:33
  4. Whipped hammock ripping?
    By gbouchar in forum Do-It-Yourself (DIY)
    Replies: 7
    Last Post: 05-10-2010, 19:37
  5. 1.9oz Ripstop ripping
    By Bulldog in forum Do-It-Yourself (DIY)
    Replies: 7
    Last Post: 03-05-2007, 11:24


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts