what size do most recommend???/ 7/64 ???????
i understand the strength is more than adequite, but is that small a diameter difficult to negotiate/fabricate into whoopy sling??????
what size do most recommend???/ 7/64 ???????
i understand the strength is more than adequite, but is that small a diameter difficult to negotiate/fabricate into whoopy sling??????
Nope, 7/64 is fairly easy to work with. If you've ever worked with 1.7 lash-it/zing-it, 7/64 is a cake-walk.
Both 7/64" and 1/8" amsteel have adequate strength and are easy to splice into whoopie slings.
7/64 is more than strong enough and plenty easy enough to spice. As mech said.... after working with zing it and lash it, 7/64 is a piece of cake. Have fun making gear.
If you ain't havin' fun, you're doin' it wrong
I'm late to the party! These guys are all correct. Go with the 7/64 for the slight weight/bulk savings
I may be dumb, but at least I'm ugly!
I've done so much, with so little, for so long, now I can do anything with nothing.
It's not peer pressure, it's just your turn.
It's easy to work with, especially if you do your taper before you make your bury.
+ 1 on the taper. And it helps if you expand the tunnel. I now use double pointed knitting needles to expand the tunnel. I think the one I use for the 7/64 is a no. 4. Its large enough to drill a hole at one end for the taper. It has been a pleasure to make whoopies ever since.
7/64 is the stock answer for folks under 250 or who do not worry about safety margins. The more safety conscious recommend 1/8 for folks over 250 or so based on a 10:1 safety factor and the loads possible with less than optimum hang angles.
YMMV
HYOH
Free advice worth what you paid for it. ;-)
I went with 1/8, but I'm also of the thought process that anything worth doing is worth over doing. Of course it doesn't work with the Dutch hooks I got, but still.
+10 on the tapering.
Bookmarks