I have been reading that the suggested suspension angle should be 30 degrees. Is that 30 degrees measured with hammock occupied or unoccupied?
I have been reading that the suggested suspension angle should be 30 degrees. Is that 30 degrees measured with hammock occupied or unoccupied?
I would recommend that you get 30% occupied. I can look over while in to get it approximately where I want it.
"I love not man the less, but Nature more."
Byron
My experience is that it really doesn't change much between loaded and unloaded. I can't see it from the side when I'm in it, so I set mine ~30* unloaded. HYOH
I agree. If you're close to 30 degrees, you don't get much change.
These 2 photos are not shot at the exact same angle, but illustrate this somewhat.
Unloaded - http://www.dream-hammock.com/photos/...s/Darien12.jpg
Loaded - http://www.dream-hammock.com/photos/...es/Darien7.jpg
You can read more on hang angles here: http://www.dream-hammock.com/HangAngle.html
Per the physics it's loaded. There will be some stretch and sag once you get in. I recommend running a structural ridge line for the hammock (if you don't already) to set the hammock sag independently from the suspension hang angle.
The 30 degree's is generally a max guide line. It's the best compromise between loading the tree/suspension too much, and needing the suspension mounted too high on the tree. It's based on having each suspension line bearing your full weight. If you set up at 30* unloaded your actual hang angle will be larger, and the suspension will bear less weight, so you know you're safe.
I have a ridgeline and I guess...either way....it's close enough.
Bookmarks