Another DIY project that i'm quite pleased with. In my indoor hang area i've used a torso length UQ as with a window unit & ceiling fan running it gets cool at night! I scrapped an old single layer 1.1 diy hammock and made an undercover from it. The suspension is similar to an UQ, side & end channels with shock cord BUT the drawcord pulls are in the center of the long sides NOT the ends. Last night i used the undercover on my HH Expediton and added a space blanket between the undercover & hammock body..No UQ. I did not cinch up the udercover tightly so the space blanket was not pressed against the bottom of the hammock. This setup was AS WARM as using my 2.1 apex torso length UQ and WITHOUT condensation! I'm quite pleased with it so far. Hennessy shows a space blanket being used as part of the supershelter insulation system in one of his videos..he's right one with how useful they are in my opinion. Again the pictures are not great...more to come from outdoors as i'll be testing this setup a good bit more.
Bookmarks