Side Pull Outs?

**ADKrella** · 01-02-2014, 21:58

Are these only available on the 12 foot tarps?
Thanks

**chickenwing** · 01-02-2014, 22:02

Nope. You can get them on any size tarp or put them on your self. Super easy to do.

**ADKrella** · 01-02-2014, 22:12

Originally Posted by chickenwing

Nope. You can get them on any size tarp or put them on your self. Super easy to do.

OK cool...It doesn't mention them on the website
(unless that's what "2 pole ready" means?)
(I looked again and 2 pole ready must mean porch mode)
and it isn't in any picture except for the "winter dream" tarp so I was curious.
Thanks

**chickenwing** · 01-02-2014, 22:39

Oops didn't pay attention that you were talking about a specific brand tarp. Still, you should be able to her them to add your outs to any of their tarps or put them on yourself.

**eviscerate3** · 01-02-2014, 22:50

This is another option. I recently ordered some and love them! You can change the location of the pullouts as needed depending on the setup.

http://dutchwaregear.com/clip-on-tarp-pull-outs.html

**sr1355** · 01-03-2014, 06:54

Originally Posted by adkrella

Are these only available on the 12 foot tarps?
Thanks

We offer pull outs standard on our widest tarps, the Hanger12, WinterDream11, and WinterDream12. The narrower tarps can also have panel pulls added via email request. Our narrowest tarps, the Hanger10 & Hanger11 don't really benefit from the additional of panel pull outs as there just isn't much tarp width to deal with. The Hanger11WB (widebody) can see benefits from the additional of panel pull outs. Cost is $10/pr, adding two will place one on each side in the center of the panel, adding four will add two to each side evenly spaced.

**tri-pod bob** · 01-03-2014, 07:00

Originally Posted by eviscerate3

This is another option. I recently ordered some and love them! You can change the location of the pullouts as needed depending on the setup.

http://dutchwaregear.com/clip-on-tarp-pull-outs.html

+1 on these. I have 2 pair & use them on my HH Hex. Increases the internal roominess nicely. Especially nice with the doors (thanks 2QZQ!) closed in this coldness we're having here now.

**ADKrella** · 01-03-2014, 11:55

Originally Posted by sr1355

We offer pull outs standard on our widest tarps, the Hanger12, WinterDream11, and WinterDream12. The narrower tarps can also have panel pulls added via email request. Our narrowest tarps, the Hanger10 & Hanger11 don't really benefit from the additional of panel pull outs as there just isn't much tarp width to deal with. The Hanger11WB (widebody) can see benefits from the additional of panel pull outs. Cost is $10/pr, adding two will place one on each side in the center of the panel, adding four will add two to each side evenly spaced.

This is the info I was after .... thank you.

**ADKrella** · 01-03-2014, 12:01

Originally Posted by tri-pod bob

+1 on these. I have 2 pair & use them on my HH Hex. Increases the internal roominess nicely. Especially nice with the doors (thanks 2QZQ!) closed in this coldness we're having here now.

I was looking at the door covers to convert a 3 season to a 4 season instead of 2 separate tarps for my first setup and keep the cost down slightly.
Was slightly worried about them not being attached though.
Have you used them in any intense weather Tripod?