Just cut to length some arrows to make spreader bars for the net and toggles
Just cut to length some arrows to make spreader bars for the net and toggles
Any suggestions on how to cover/seal the ends ?
I'm thinking the thin walls are sharp, and might prevent the ends from getting damaged or causing damage. I was thinking of plugging the ends with a small bit of foam and dipping the ends in a two part epoxy.
The pipe cutter left a knife edge on the cut that was quite sharp. I sanded the edges down and it is much better.
Of some note to those concerned with weight the tarp hammock stuff sack with the suspension swamped out with whoopie s weights 3.6 lbs. This is acceptable to me considering the comfort of the hammock
This was one of my first hammocks and I haven't set it up in months. All this talk is making me think I should set it up again
Bookmarks