I got a jarbidge underquilt for my HH expedition, and i also got the triangle adapters to, but no matter what, i cant get it set up properly. The UQ slips out from under me. Any help would be highly appriciated!
I got a jarbidge underquilt for my HH expedition, and i also got the triangle adapters to, but no matter what, i cant get it set up properly. The UQ slips out from under me. Any help would be highly appriciated!
If it's pulling then the suspension cords are strung to tight. Loosen them up and it won't pull.
Arrowhead Equipment -- For all your hammock camping and backpacking gear
Arrowhead-Equipment.com Visit AHE on Facebook Follow us on Twitter Check out pictures on Instagram
Sign Up for Arrowhead-Equipment Gear News: Click Here
ok ill try this
Whats happening is that when pulled tightly the quilt wants to be in a strait line as much as possible rathe than the slight curve of the sag of the hammock. The easiest way for a overly tight quilt to get strait is to pull out from one side...not hard when your laying asym in the hammock and the quilt is pulling strait in line again from being tight.
Loosening the suspension on the quilt will allow it to hug into place. With the triangles your able to adjust each corner independently so you can really allow the quilt to hang asym just by snugging 2 lines and loosening the 2 others...opposite corners that is.
Arrowhead Equipment -- For all your hammock camping and backpacking gear
Arrowhead-Equipment.com Visit AHE on Facebook Follow us on Twitter Check out pictures on Instagram
Sign Up for Arrowhead-Equipment Gear News: Click Here
Bookmarks