I am new here and have gathered from other threads that, (maybe wrong) most bridge hammocks are not for larger people!
I'm a 6'5" 350 guy and would love to try one if I could! But I don't want to end up with a sore back side!
Thanks
Terry
I am new here and have gathered from other threads that, (maybe wrong) most bridge hammocks are not for larger people!
I'm a 6'5" 350 guy and would love to try one if I could! But I don't want to end up with a sore back side!
Thanks
Terry
The hard things we do right away, the impossible stuff take us a bit longer!!!
Wow, I was just thinking about starting a thread like this! We're almost the same size (I'm an inch shorter, but the same weight).
I'm happy with my hammocks, but I am interested in trying a bridge out someday. I hope someone can give you some good info on this.
Most that I have seen go up to 250. I was thinking of checking with Warbonnet to see if Brandon can make a beefed up ridgerunner.
"I love not man the less, but Nature more."
Byron
I wonder where the fail point is? I'm sure someone way smarter than me could tell us!
I would be willing to make my own, just need to know where I would need to beef up from a standard bridge hammock!
The hard things we do right away, the impossible stuff take us a bit longer!!!
From the official Warbonnet Ridgerunner intro thread I believe there were spreader bar failures with the stock spreader bars with folks in the 220-250 range so he started offering more robust spreader bars for bigger folks. I'm 6'2'' 280lbs. and the beefier spreader bars feel like they can stand up to guys bigger than me. How much bigger, I'm not sure.
I'd reach out to him personally to see what his thoughts are on the subject.
I see no reason why a heftier version of the bridge hammock couldn't be made. The major stress point is still the same no matter the weight and that is the spreader bar. Just get a larger diameter spreader bar with same type of fabric you use now and you should be fine. I'm pretty sure the mule tape will still work for the sides. Id be surprised if warbonnet wouldnt be able to help ya out.
If you cant find a vendor to fix ya up, shoot me a pm.
My thoughts are as follows;
The width of the hammock is important, too narrow and you will be compressed at the shoulders.
The length of the spreader bars is important to limit the sagging of the bridge and creating a a deep pocket with high walls. Wider bars are better.
Strength of the bars. Too weak and the bars will flex. Folks have recently (I think it's recently) been offering "oversized" bars that are stronger and don't flex nearly as much.
The edges take an incredible amount of stress. Stitching here is critical. Having tested a bridge hammock by a member, I was very impressed with the stitching of the hammock material to the grosgrain along the edge. Once loaded, both sides of the hammock are virtual bars that run the length of the hammock to the spreader bar attachment points.
Double layer would be nice, allows for more weight but again, the stitching along the edge has to be spot on.
Many people are very happy with their bridges. Having only tried one, I am still on the fence. The hammock felt more coffin like to me. I did not experience any particular advantage when side sleeping as compared to a gathered end hammock and I wasn't able to stretch out, shift around into different positions and really relax like I can in a gathered end hammock. YMMV HYOH
Have sherpas, will travel...
Triangles, it's all about the triangles.
H30º ™
HTA
8.7167º
I agree. I am a larger person as well (250ish) and although not as much as the original poster of this thread. I made my bridge hammock out of the crinkle polyester tafetta tablecloth material. I find it quite comfortable for me and I have broad shoulders. I use 36" spreader bars which are 1" hardwood dowels that I carved notches in the ends to attach the corner rings.
Xtrekker is correct that the main stress points on a bridge hammock are the at the corners where the spreader bar attaches. Also all of the weight of the hammock is carried on the fabric edges so having strong and wide enough webbing is essential. Spreader bar forces can be reduced by making the side length of the suspension triangle longer. This is what the Ridgerunner does as its is spreader bar length at the head end is just a little shorter than the fabric length.
Many people choose bridge hammocks if they can't resolve the issues with calf and knee pressure in a traditional gathered end hammock.
Cheers
Brian
Good judgment comes from experience, and often experience comes from bad judgment. - Unknown
expect Zilla to chime in soon. He recently made one for himself, same weight range. The hammock is double body 1.9 oz/yd^2 ripstop, big suspension triangle (sides equal to length of spreader bar), 0.74" diameter Easton spreader bars from Questoutfitters, 1/8" Amsteel. And WIDE, something like 42" at the head and 40" at the foot.
I was very interested in this project as it ventured into requirements I've not had to deal with.
of course, if we don't hear from Zilla we might figure that ....
Grizz
(alias ProfessorHammock on youtube)
Just adding my experience, limited as it may be...
I reached out to both Jacks R Better and Warbonnet today - neither will take on "custom" work to accommodate those looking for anything not already being sold. Both guys are nice, but it isn't in their business interest (and reasonably so) to manage custom work.
duane
Bookmarks