Lash-It Tarp CRL and Prusik Loops

[Burnt]

First post here so hello everyone!

I use a continuous ridgeline for my tarp made from Lash-It. I've noticed that after some time in the wind or overnight that the tarp won't be as taught then when I first pulled it tight. The tarp is connect to the ridgeline with Prusik loops on each end but the loops have been slipping on the Lash-It. I know that its advised that you should use a smaller cordage from a loop then the rope you are tying it onto but Lash-It is what I had on hand so it makes up both my ridgeline and the loops. What different cordage would you guys recommend for this method?

[Rolloff]

Shot cord if you can find it. That's the lighter line they use to shoot from ship to ship, as a feeder.

Otherwise, try using a few extra wraps on the Prussics or try a Klemheist knot. They are directional, but seem to work a little better in these applications.

http://www.animatedknots.com/klemhei...matedknots.com

[mudsocks]

3 wraps works perfectly on my tarp. Often people overlook the importance of a well dressed knot. I find my prusiks need to be redressed occasionally, especially after frequent adjustment.

[Nodust]

I use Zing-it with four wraps on the prusik. Dress prusik and redress as needed. They get so tight I have trouble adjusting tarp on the CRL.

[natureboy68]

How would mason line perform as a prussic loop on zing-it? I like haveing that as the fail point, lest the tarp get ripped to shreds...

[Burnt]

Finally got a day to hang the tarp and wrapped the Prussics a couple extra times and that did the job! I was only using three loops so thanks for the tip.

[gunner76]

Braided mason line works. I like to do about 5 wraps on my prussics.