Saturday in Canada means hockey. And during the NHL playoffs, it means all-day hockey. Because of that, I lined up a few craft beverages and all of my amsteel and lash-it projects for today.

I built three continuous ridgelines for my tarps along with a couple of continuous loops and a structural ridgeline for my new TTTM hammock. Before the end of the day (and the beverages), I'll probably make a couple of dogbones out of the remaining amsteel and maybe a few continuous loops out of lash-it that I can use as prussiks.

All of this work I've done today has been based on the outstanding videos by TheBrewGuy. Those of you that have been around the forums for a while are probably nodding as you read this. But for any newbs like me, be sure to check out his videos as you start building your own suspension pieces. Not only does he show you how to create everything but he shows the measurements that he uses for buries. Lots of help in each video!

Here are some of the videos I used today from TheBrewGuy:







As if that wasn't enough, I've also used his whoopie sling video in the past:



Thanks for your help Ian!